Skip to main content Skip to search Skip to main navigation

barox RY-LGSP28-28 PoE Switch

barox RY-LGSP28-28, the 19-inch L2 L3 PoE switch with 24 ports 10 / 100 / 1000TX PoE plus, 4 SFP SFP+ 1G 10G ports, Websmart management, ring-enabled, DMS system, Non Stop PoE, 370 W PoE budget

The barox RY-LGSP28-28 is the 19-inch L2 and L3 switch with PoE plus. It features 24 ports 10 / 100 / 1000TX with PoE plus and 4 SFP SFP+ ports for 1G 10G. The switch is specifically designed for high data load applications such as video over IP and video streaming. PoE supplies IP cameras directly through the data cable. With its comprehensive security features, it protects both the switch itself and network traffic.

The barox RY-LGSP28-28 offers extra high backplane performance for smooth video transmission with full port utilization. Jumbo frames up to 10240 bytes are supported even at 100Mbit per second. MAC address restriction provides additional port security. The switch actively monitors connected cameras and automatically restarts them in case of failure. In the event of malfunctions, it sends alerts via SNMP.

The barox RY-LGSP28-28 features an integrated DMS system with graphical network overview, device search, and graphical data traffic display. It is Websmart manageable and ring-enabled. The Non Stop PoE function ensures that PoE power supply to cameras is not interrupted during switch reboot. PoE ports can be started on a timed schedule to prevent PoE power overload. The switch supports PTP according to IEEE 1588 V2.

The barox RY-LGSP28-28 is the ideal choice for smaller video networks and surveillance systems. It combines high PoE performance, gigabit speed, and intelligent monitoring functions in a compact 19-inch housing. The dimensions of 442 by 211 by 44 millimeters and the gross weight of 4.3 kilograms make installation particularly easy. The barox RY-LGSP28-28 operates in a temperature range from 0 to 45 degrees Celsius.

Why the barox RY-LGSP28-28 is the best PoE switch:

  • 24 ports 10 / 100 / 1000TX with PoE plus
  • 4 ports SFP SFP+ 1G 10G
  • PoE total power 370 watts
  • L2 L3 functions with static routing
  • Websmart management, ring-enabled
  • Integrated DMS network management system
  • Non Stop PoE during restart
  • IEEE 1588 V2 PTP support
  • Active camera monitoring with automatic restart
  • Controlled fans for optimal cooling

Technical data:

  • 24 ports 10 / 100 / 1000TX with PoE plus RJ45
  • 4 ports SFP SFP+ 1G 10G
  • PoE total power 370 watts
  • L2 L3 functions with static routing
  • Websmart management, ring-enabled
  • DMS network management system
  • Backplane 128 Gbit per second
  • MAC table 32k
  • Non Stop PoE
  • Dimensions 442 by 211 by 44 millimeters
Datasheets
Datasheet 1

Oops! Your browser doesn't support PDFs!

Datasheet 1 (269.11 KB)

barox RY-LGSP28-28

General Data
  • Copper Ports: 24 x 10/100/1000TX PoE+ RJ45
  • Maximum PoE Power of all Ports: 370 W
  • Fiber Ports: 4 x SFP/SFP+ (1G/10G)
  • Console: 1 x RS232 RJ45
  • Backplane: 128 Gbit/s
  • MAC Table: 32K
Power Supply
  • Input Voltage: 100–240 V AC, 50–60 Hz
  • Power Consumption: Max. 40 W (without PoE) / 410 W (with PoE)
  • Power Loss: 225 BTU/h
Mechanics
  • Dimensions: 442 x 211 x 44 mm (L x W x H)
  • Weight: Gross 4.3 kg / Net 3.7 kg
  • Operating Temperature: 0–45 °C
Management & Configuration
  • HTTP/HTTPS, SSH, Telnet, IPv6 Management
  • SNMP v1, v2c, v3 (incl. Traps & USM)
  • DHCP Client / DHCPv6 Client / DHCP Server
  • PTP (IEEE 1588 v2), RMON (Groups 1,2,3,9)
  • Web GUI, DMS, SNMP, Console, Telnet
PoE Management
  • Port-based PoE Configuration
  • PoE Scheduling (On/Off per Port)
  • Auto-Check (Restart of PDs on Failure)
  • Power Delay to Protect against Overload
  • Non-Stop PoE (Supply even during Soft-Reboot)
Port Functions
  • Port Enable/Disable
  • Auto-Negotiation 10/100/1000 Mbps
  • Flow Control
  • Data Rate Control per Port
  • Max. Frame Size & Power Control
Status Displays
  • Display per Port: Speed, Link-Status, Flow Control, Auto-Negotiation, Trunk Status
Layer 3 Functions
  • IPv4 & IPv6 Unicast Static Routing
Redundancy & Topology
  • STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s)
  • ERPS (G.8032), ELPS (G.8031)
VLAN
  • IEEE 802.1Q VLAN (up to 4096 VLAN IDs)
  • Port-based VLAN, Private VLAN (PVE)
  • Voice VLAN, Guest VLAN
  • Q-in-Q (Double Tagging)
  • MAC-based VLAN, IP Subnet VLAN
  • Management VLAN
  • 802.1v Protocol VLAN
Link Aggregation
  • IEEE 802.3ad LACP / Static Trunk
  • Up to 5 Groups with 16 Ports each
QoS
  • 8 Hardware Queues
  • Strict Priority & Weighted Round Robin (WRR)
  • Classification: Port-based, 802.1p, DSCP, ACL
  • Rate Limiting (Ingress/Egress)
Security
  • SSH v1/v2, SSL, HTTPS
  • 802.1X RADIUS, TACACS+
  • ACL (up to 512 entries)
  • Port Security, IP Source Guard
  • Storm Control
  • DHCP Snooping
  • Loop Protection
  • BPDU Guard
Multicast
  • IGMP v1/v2/v3 Snooping (up to 1024 Groups)
  • IGMP Querier, IGMP Proxy
  • MLD v1/v2 Snooping (IPv6)
  • Multicast VLAN Registration (MVR)
Standards
  • IEEE 802.3 / 802.3u / 802.3ab / 802.3z
  • IEEE 802.3x Flow Control
  • IEEE 802.3ad LACP
  • IEEE 802.1d / 802.1w / 802.1s Spanning Tree
  • IEEE 802.1p QoS
  • IEEE 802.1Q VLAN
  • IEEE 802.1X Port Authentication
  • IEEE 802.1AB LLDP
  • IEEE 802.3af/at PoE
  • IEEE 802.3az Energy Efficient Ethernet
  • IEEE 1588v2 PTP

Manufacturer Information:

barox Kommunikation GmbH

Weiler Strasse 7

79540 Lörrach
Deutschland

Tel: +49 7621 1593 100

Email: mail@barox.ch

Responsible person:

Didactum® Security GmbH

Im Mühlenfeld 4

48163 Münster
Deutschland

Fon: (+49) 2501 92 90 160 oder (+49) 171 33 11 577

Email: info@didactum-security.de

Questions?

You have questions about Akuvox products?

You would like a quote?

Contact us