Monitoring
Monitoring can be simple: for example, just connect the temperature sensor to your monitoring and alarm system. Then, enter the warning thresholds via the web interface and choose whether you'd like to receive notifications by email, SMS, or SNMP trap. Done!
Temperature Sensor
This sensor is designed for temperature monitoring and connects to IT monitoring systems via an RJ11 cable.
hanks to automatic identification, this IP-enabled temperature sensor is immediately recognized and displayed in the web interface. In the event of overheating, notifications are sent via email, SMS (using a GSM modem), or SNMP traps.
Temperature readings can also be retrieved over LAN or the Internet using SNMP GET.
Technical Specifications
- Operating temperature: -40° to +100°C
- Accuracy: ±0.4°C
- Extendable: up to 100 m via RJ11 cable
- Cable length: 2 m
- Temperature range: -40°C to +100°C
- Accuracy: ±0.15°C at room temperature
- Connector type: RJ-11 / 6P4C
- Power consumption: 60 mW
Outdoor Temperature Sensor
The outdoor temperature sensor is specifically designed for accurate temperature measurement in outdoor environments. It is weatherproof and fully compatible with all network-based Didactum monitoring and alarm systems.
The sensor is supplied with a 15-meter RJ-11 connection cable.
Seamless integration with SNMP monitoring tools and network management systems (e.g., Nagios) is supported.
Technical Specifications:
- Connection: Plug & Play via analog RJ-11 sensor ports
- Auto-sensing function: Yes
- Operating temperature range: -40°C to +100°C
- Accuracy: ±1°C
- Sensor head dimensions (stainless steel): Diameter 7 mm, length 30 mm
- Weight: 0.45 kg
- able extension: Extendable up to 100 meters via RJ-11 cable
Sensor for Humidity Monitoring
In server rooms and data centers, low humidity levels in the ambient air can lead to static electricity buildup. On the other hand, high humidity levels can promote the formation of condensation or water droplets.
These often microscopic water particles may settle on circuit boards and, in the worst-case scenario, cause short circuits.
Therefore, it is essential to monitor the ambient humidity using the IP Humidity Sensor.
Technical Specifications:
- Installation: Suitable for table, ceiling, wall mounting, or installation in IT racks
- Measurement Range: 0% to 95% relative humidity (RH)
- Accuracy: ±3% RH
- Permissible Operating Temperature: -40°C to +100°C
- Dimensions: 8.19 x 1.8 x 1.8 cm (L x W x H)
- Weight: 16 grams (net)
- Labeling: Yes
- SNMP OID: Yes
- Extension: Optionally extendable, can be positioned up to 50 meters away
An overview of the sensors in the video:
These sensors can be used with:
