€3,792.00
barox RY-LGSP38-52/740, the 19-inch L2 L3 PoE Switch with 48 Ports 10 / 100 / 1000TX PoE plus, 4 SFP SFP+ 1G 10G Ports, Websmart Management ring capable, DMS system, Non Stop PoE, 740 W PoE budget, static and dynamic routing
The barox RY-LGSP38-52/740 is the 19-inch L2 and L3 switch with PoE plus. It features 48 ports 10 / 100 / 1000TX with PoE plus and 4 SFP SFP+ ports for 1G 10G. The switch was specially developed for high data load applications such as Video over IP and Video Streaming. PoE powers IP cameras directly via the data cable. With its extensive security features, it protects both the switch itself and the network traffic.
The barox RY-LGSP38-52/740 offers extra high backplane performance for smooth video transmission at full port utilization. Jumbo frames up to 10240 bytes are supported even at 100 Mbit per second. The MAC address limitation ensures additional port security. The switch actively monitors connected cameras and automatically restarts them in case of failure. In case of malfunctions, it alerts via SNMP.
The barox RY-LGSP38-52/740 has an integrated DMS system with graphical network overview, device search, and graphical data traffic display. It is Websmart manageable and ring capable. The Non Stop PoE function ensures that the PoE supply to the cameras is not interrupted during a switch restart. The PoE ports can be started on a timed schedule to prevent overload of the PoE power supply. The switch supports static and dynamic routing with OSPFv2 v3 and RIPv1 v2.
The barox RY-LGSP38-52/740 is the ideal choice for professional video networks and surveillance systems. It combines high PoE performance, gigabit speed, and intelligent monitoring functions in a compact 19-inch housing. The dimensions of 442 by 375 by 44 millimeters and the gross weight of 6.7 kilograms make installation especially easy. The barox RY-LGSP38-52/740 operates in a temperature range from 0 to 50 degrees Celsius.
Why the barox RY-LGSP38-52/740 is the best PoE switch:
- 48 Ports 10 / 100 / 1000TX with PoE plus
- 4 Ports SFP SFP+ 1G 10G
- PoE total power 740 watts
- L2 L3 functions with static and dynamic routing
- Websmart Management ring capable
- Integrated DMS network management system
- Non Stop PoE during restart
- Active camera monitoring with automatic restart
- PoE scheduling and power delay
- Video optimized backplane performance
Technical data:
- 48 Ports 10 / 100 / 1000TX with PoE plus RJ45
- 4 Ports SFP SFP+ 1G 10G
- PoE total power 740 watts
- L2 L3 functions with static and dynamic routing
- Websmart Management ring capable
- DMS network management system
- Backplane 176 GBit per second
- MAC table 32k
- Non Stop PoE
- Dimensions 442 x 375 x 44 millimeters
barox RY-LGSP38-52/740
- Copper Ports: 48 x 10/100/1000TX, PoE+, RJ45
- Maximum PoE Power: 740W total
- Fiber Ports: 4 x SFP/SFP+, 1G/10G
- SFP Note: Use of barox SFPs recommended, compatibility with third-party manufacturers not guaranteed
- Console Port: 1 x RS232, RJ45
- Power Supply: 100–240VAC, 50–60Hz
- Power Consumption: max. 40W (without PoE) / 780W (with PoE)
- MTBF: 25°C: 132,737h / 40°C: 78,032h / 50°C: 49,755h
- Operating Temperature: 0°C to 50°C
- Dimensions: 442 x 375 x 44mm (W x D x H)
- Weight: Gross 6.7 kg / Net 5.8 kg
- Backplane: 176 GBit/s
- MAC Table: 32K
Management & Configuration
- Web GUI, DMS, SNMP v1/v2c/v3, Console, Telnet, RMON
- Individual deactivation of management access
PoE Functions
- Port-based PoE configuration
- PoE scheduling per port
- Automatic device check and restart
- Power delay protection to prevent overload
- Non-Stop PoE during soft reboot
Port Functions
- Port enable/disable
- Autonegotiation 10/100/1000 Mbps
- Flow control
- Data rate control
- Maximum frame size
Layer 3 Functions
- IPv4/IPv6 Unicast Static Routing
- RIP v1/v2
- OSPF v2/v3
Redundancy & Network
- STP, RSTP, MSTP
VLAN Functions
- 802.1Q VLAN (up to 4096 VLANs)
- Port-based VLAN
- Private VLAN / PVE
- Voice VLAN
- Guest VLAN
- Q-in-Q VLAN
- 802.1v Protocol VLAN
- MAC-based VLAN
- IP Subnet VLAN
- Management VLAN
Link Aggregation
- IEEE 802.3ad LACP / Static Trunk
QoS
- 8 hardware queues
- Port-based QoS
- 802.1p QoS
- DSCP QoS
- ACL-based classification
- Rate limiting
- Ingress policing
- Egress shaping
- WRR & Strict Priority scheduling
Security Features
- HTTPS, SSL, SSH v1/v2
- RADIUS & 802.1X
- TACACS+
- ACL (up to 512 rules)
- Port security
- Storm control
- DHCP snooping
Multicast
- IGMP v1/v2/v3 Snooping
- IGMP Querier
- IGMP Proxy
- MLD v1/v2 Snooping
- MVR
Standards
- IEEE 802.3, 802.3u, 802.3z, 802.3ab
- IEEE 802.3x Flow Control
- IEEE 802.3ad LACP
- IEEE 802.1d/w/s Spanning Tree
- IEEE 802.1p QoS
- IEEE 802.1Q VLAN
- IEEE 802.1x Authentication
- IEEE 802.1ab LLDP
- IEEE 802.3af/at PoE
- IEEE 802.az Energy Efficient Ethernet
Manufacturer Information:
barox Kommunikation GmbH
Weiler Strasse 7
79540 Lörrach
Deutschland
Tel: +49 7621 1593 100
Email: mail@barox.ch
Responsible person:
Didactum® Security GmbH
Im Mühlenfeld 4
48163 Münster
Deutschland
Fon:
(+49) 2501 92 90 160 oder (+49) 171 33 11 577
Email: info@didactum-security.de