barox RY-LGSPTR28-52 PoE Switch
€4,692.00
barox RY-LGSPTR28-52, the 19-inch L2 L3 PoE switch with 48 ports 10 / 100 / 1000TX PoE plus, 4 SFP SFP+ 1G 10G ports, redundant power supply, DMS system, Non Stop PoE, PTP IEEE 1588 V2, ring-capable management, up to 920 watts PoE
The barox RY-LGSPTR28-52 is the 19-inch L2 L3 switch with PoE plus. It offers 48 ports 10 / 100 / 1000TX with PoE plus and 4 SFP SFP+ ports for 1G 10G. The switch was specially designed for high data load applications such as video over IP and video streaming. PoE powers IP cameras directly via the data cable. With its comprehensive security features, it protects both the switch itself and the network traffic.
The barox RY-LGSPTR28-52 provides extra-high backplane performance for smooth video transmission at full port load. Jumbo frames up to 10240 bytes are supported even at 100 Mbit per second. MAC address limitation ensures additional port security. The switch actively monitors connected cameras and automatically restarts them in case of failure. In case of faults, it sends alerts via SNMP.
The barox RY-LGSPTR28-52 features an integrated DMS system with graphical network overview, device search, and graphical data traffic display. It is Websmart manageable and ring-capable. The Non Stop PoE function ensures that PoE power supply to cameras is not interrupted during switch reboot. The redundant 230 Volt AC power supply increases reliability. The switch supports PTP according to IEEE 1588 V2 for precise time synchronization.
The barox RY-LGSPTR28-52 is the ideal choice for professional video networks and surveillance systems. It combines high PoE performance, gigabit speed, and intelligent monitoring functions in a compact 19-inch housing. The dimensions of 442 by 440 by 44 millimeters and the gross weight of 8.4 kilograms make installation particularly easy. The barox RY-LGSPTR28-52 operates in a temperature range from 0 to 45 degrees Celsius.
Why the barox RY-LGSPTR28-52 is the best PoE switch:
- 48 ports 10 / 100 / 1000TX with PoE plus
- 4 ports SFP SFP+ 1G / 10G
- PoE total power 920 watts
- Redundant power supply 230 Volt AC
- L2 L3 functions with static routing
- Websmart management ring-capable
- Integrated DMS network management system
- Non Stop PoE during restart
- PTP IEEE 1588 V2 time synchronization
- Video-optimized backplane performance
Technical data:
- 48 ports 10 / 100 / 1000TX with PoE plus RJ45
- 4 ports SFP SFP+ 1G / 10G
- PoE total power 920 watts
- Redundant power supply 230 Volt AC
- Backplane 176 Gbit per second
- MAC table 32k
- Non Stop PoE
- PTP IEEE 1588 V2
- DMS graphical network management
- Dimensions 442 by 440 by 44 millimeters
barox RY-LGSPTR28-52
- Copper Ports: 48 x 10/100/1000TX, RJ45 with PoE+ (802.3af/at)
- Maximum PoE Power: 920 W (up to 1840 W with second power supply)
- PoE Redundancy Note: When using redundant power, the PoE load should not exceed 920 W
- Fiber Ports: 4 x SFP/SFP+ (1G/10G)
- SFP Note: Use of barox SFPs is recommended; compatibility with third‑party manufacturers is not guaranteed
- Console Port: 1 x RS232, RJ45
- Supply Voltage: 100–240 VAC, 50–60 Hz
- Redundant Power Supply: optional with additional PSU RY‑PS‑TR920
- Power Consumption: max. 40 W (without PoE) / 1000 W (with 920 W PoE) / 2000 W (with 1840 W PoE)
- MTBF: 25°C: 129,236 h / 40°C: 69,015 h / 50°C: 44,683 h
- Operating Temperature: 0°C to 45°C
- Power Dissipation: 356 BTU/h
- Dimensions: 442 x 440 x 44 mm (L x W x H)
- Weight: Gross 8.4 kg / Net 6.7 kg
- Backplane: 176 Gbit/s
- MAC Table: 32K
Management & Configuration
- HTTP/HTTPS, SSH, Telnet, IPv6 Management
- SNMP v1/v2c/v3 (including Traps and USM)
- DHCP Client / DHCPv6 Client
- DHCP Server
- PTP (IEEE 1588v2)
- RMON (Groups 1, 2, 3, 9)
- Console, Web GUI, SNMP
PoE Management
- Port‑based PoE configuration
- PoE scheduling (time‑controlled on/off)
- Automatic device monitoring and restart
- Power delay to protect against overload
- Non‑Stop PoE during soft reboot
Port Functions
- Port Enable/Disable
- Autonegotiation 10/100/1000 Mbps
- Flow Control
- Data rate control per port
- Maximum frame size
Layer 3 Functions
- IPv4/IPv6 Unicast Static Routing
Redundancy & Topology
- STP, RSTP, MSTP
- ERPS (G.8032)
- ELPS (G.8031)
VLAN Functions
- 802.1Q VLAN (up to 4096 VLAN IDs)
- Port‑based VLANs
- Private VLAN / PVE
- Voice VLAN
- Guest VLAN (802.1X)
- Q‑in‑Q VLAN
- Protocol‑based VLANs (802.1v)
- MAC‑based VLANs
- IP‑subnet‑based VLANs
- Management VLAN
Link Aggregation
- IEEE 802.3ad LACP / Static Trunk (up to 5 groups with 16 ports each)
QoS
- 8 Hardware Queues
- Traffic classification (Port, 802.1p, DSCP)
- ACL‑based QoS
- Rate limiting, Ingress policing
- Egress shaping per port
- Scheduling: Strict Priority and WRR
Security Features
- Port Security, MAC/IP Binding
- Storm Control
- 802.1X RADIUS (including dynamic VLAN assignment)
- TACACS+
- SSH v1/v2, SSL, HTTPS
- BPDU Guard
- DHCP Snooping
- Loop Protection
Multicast
- IGMP v1/v2/v3 Snooping (up to 1024 groups)
- IGMP Querier and Proxy
- MLD v1/v2 Snooping (IPv6)
- Multicast VLAN Registration (MVR)
Standards
- IEEE 802.3, 802.3u, 802.3z, 802.3ab
- IEEE 802.3x Flow Control
- IEEE 802.3ad LACP
- IEEE 802.1d/w/s Spanning Tree
- IEEE 802.1p QoS
- IEEE 802.1Q VLAN
- IEEE 802.1x Authentication
- IEEE 802.1ab LLDP
- IEEE 802.3af/at PoE
- IEEE 802.3az Energy Efficient Ethernet
- IEEE 1588v2 PTP
Manufacturer Information:
barox Kommunikation GmbH
Weiler Strasse 7
79540 Lörrach
Deutschland
Tel: +49 7621 1593 100
Email: mail@barox.ch
Responsible person:
Didactum® Security GmbH
Im Mühlenfeld 4
48163 Münster
Deutschland
Fon:
(+49) 2501 92 90 160 oder (+49) 171 33 11 577
Email: info@didactum-security.de
