Akuvox AV-A08K Access Control Terminal

The compact access control terminal with door controller and card reader in one device

The Akuvox AV-A08K is a slim access control terminal that combines a door controller and card reader in a single, very compact housing. This eliminates the need for building operators to purchase a separate controller and reader, reducing installation effort and costs. Flexible recognition methods are available for access release: PIN code via the illuminated touch keypad, card at the integrated multi-frequency card reader, and mobile access via NFC. The device comes from the same series as the A08 model, which was awarded the iF Design Award 2025, and was developed under the guiding principle of “minimum installation space, maximum access performance”.

Flexible mounting: The AV-A08K can be mounted either flush (recessed into the wall) or surface-mounted. Connection is via Ethernet (RJ45, 10/100 Mbps) with Power over Ethernet according to 802.3af; alternatively via an external 12 V DC connection with 600 mA output power if PoE is not available.

Thanks to support for Wiegand and the open OSDP protocol, the AV-A08K can be operated either as a standalone door controller or integrated as a pure card reader into existing access systems.

Door controller, card reader and keypad in one device

The AV-A08K combines all the essential functions of a professional access terminal in a compact, robust housing.

How the AV-A08K is built

The slim housing of the AV-A08K is deliberately kept compact so that the terminal can also be installed on narrow door frames or in tight wall recesses.

Flexible ways to grant access

Depending on the application, the AV-A08K can be used in different ways for access release.

• Entry of a personal PIN code on the touch keypad
• Holding a 13.56 MHz or 125 kHz card to the integrated reader
• Mobile access via NFC directly from the smartphone (Android only)
• Central release and management via ACMS, SDMC or the Akuvox Cloud

More than just door opening

Beyond pure access release, the AV-A08K includes functions that are typically required in professional access management.

• Time-controlled access schedules (Access Schedule)
• Management of different access authorization levels
• Switchable to pure card reader mode for external controllers
• Logging of all door access events
• Flexible shift planning and time & attendance (Attendance Management)

Integration into existing systems

The AV-A08K is designed as an open access terminal and can be integrated both as a standalone unit and into larger access infrastructures.

On the network side, the AV-A08K supports among other things IPv4, HTTP(S), FTP, DNS, NTP, TCP, UDP, ICMP, DHCP and ARP.

Also designed for many users as a standalone unit

The AV-A08K can also manage access data locally on the device entirely without central management software.

Maintenance and operation from a distance

For professional operation and remote maintenance, the AV-A08K includes several administrative functions.

• Auto-provisioning for automated initial setup
• Management via a web-based management portal
• Web-based packet dump for network diagnostics
• Backup and restore of the configuration
• Firmware updates via the web interface
• Central management via the Akuvox Cloud
• Central management via Akuvox SDMC and ACMS

Robustly built for continuous outdoor use

As an access terminal, the AV-A08K is exposed to direct weather and potential sabotage – the design is accordingly geared towards continuous operation.

• Aluminium frame with tempered glass front panel
• IP65 protection against dust and water jets
• Impact resistance according to IK09 for additional vandalism protection
• Integrated tamper alarm in case of forced dismantling
• Operating temperature from −20 °C to +55 °C
• Storage temperature from −30 °C to +70 °C

Commissioning in a few steps

Setting up the AV-A08K can be completed in a short time even without prior knowledge.

1. Determine mounting type: flush or surface-mount
2. Mount the device and connect the Ethernet/PoE cable or 12 V DC supply
3. Perform basic setup via the terminal’s web interface
4. Enrol cards and PIN codes and define access authorization levels
5. Optional: set up time-controlled access schedules and shift plans
6. Optional: integration into an existing access infrastructure via Wiegand or OSDP
7. Optional: set up central management via ACMS, SDMC or the Akuvox Cloud

What is included in the scope of delivery

Please check the scope of delivery upon receipt for completeness and report any missing or damaged parts immediately to your supplier.

• Akuvox AV-A08K access terminal1 piece
• Mounting screws & wall plugs1 set
• Terminal blocks for relay/inputs1 set
• Quick start guide1 piece

Why the AV-A08K is suitable

Practical application examples

• Access control for condominiums and apartment buildings
• Access point for office buildings with many employees
• Access solution for gated communities
• Access control for industrial buildings and company premises
• Supplement or replacement of existing Wiegand or OSDP readers
• Time & attendance and shift planning via the integrated access management

The Akuvox AV-A08K combines door controller and card reader in a compact, vandal-resistant terminal with multiple flexible access methods – a space-saving solution for buildings where reliable access control without a separate controller is required.

More about the Akuvox AV-A08K

Frequently asked questions