COMET DIGIS/M – Temperature and Humidity Probe, -10 to +60 °C, MiniDin Connector

COMET DIGIS/M – compact digital temperature-humidity probe 63 x 16 mm, -10 to +60 °C (±0.4 °C) / 0–100 %RH (±1.8 %), MiniDin connector 

The COMET DIGIS/M is a compact digital temperature and humidity probe with MiniDin connector – the ideal solution for precise measurement in climate chambers, incubators, drying ovens, cold chains, laboratory equipment, storage monitoring, or anywhere a small, accurate, and replaceable probe is needed. Measuring just 63 x 16 mm and weighing around 10 g, the probe fits easily into confined spaces, test chambers, or instruments without significantly affecting volume or airflow.

The digital sensor combines a high-precision temperature sensor (±0.4 °C) and a capacitive humidity sensor (±1.8 %RH in the 0 to 90 % range at 23 °C) in one device. The dew point is calculated automatically. The probe is temperature-compensated and provides stable readings across the entire range of -10 to +60 °C and 0 to 100 %RH. The included calibration certificate ensures traceable factory accuracy. The digital interface enables 100% interchangeability without recalibration – regardless of cable length or connected device – ideal for service and maintenance.

The MiniDin connector ensures a secure and quick connection to COMET measuring devices, transmitters, or data loggers. The probe is maintenance-free, long-term stable, and comes with a 3-year warranty. Whether for calibration labs, research, pharmaceutical production, or quality control – the DIGIS/M impresses with its compact design, high precision, and ease of use. Its fast humidity response (t90 <9 s) and solid temperature response (t90 <15 min) ensure reliable measurement results.

Why the COMET DIGIS/M is the best compact digital probe:

• Compact – only 63 x 16 mm, perfect for tight installation spaces
• High precision – Temp. ±0.4 °C | Humidity ±1.8 %RH (0–90 %)
• Digital interface – interchangeable without recalibration
• MiniDin connector – fast and secure connection
• Calibration certificate included – factory traceable
• IP30 protection – for indoor and protected applications
• Long-term stable and maintenance-free – 3-year warranty
• Dew point and all humidity parameters directly available
• Original COMET quality – for research and industry
• Fast humidity response – t90 <9 s

Technical data DIGIS/M:

• Temperature range: -10 to +60 °C (±0.4 °C)
• Humidity range: 0 to 100 %RH (±1.8 %RH from 0 to 90 % at 23 °C)
• Dew point: -60 to +60 °C
• Temperature response time: t90 <15 min (temperature step 20 °C, airflow 1 m/s)
• Humidity response time: t90 <9 s (humidity step 60 %RH, constant temperature)
• Hysteresis: ±1 %RH
• Linearity: ±1 %RH
• Connection: MiniDin connector
• Dimensions: 63 x 16 mm
• Weight: approx. 10 g
• Protection class: IP30

Perfect for:

• Climate chambers and incubators
• Drying ovens and test chambers
• Laboratories and research facilities
• Pharmaceutical and food quality control
• Connection to COMET transmitters and loggers
• Retrofits and replacements in existing systems
• Precision measurement with minimal volume impact
• Interchangeable sensors without calibration effort

Installation and use – simple and fast

Position the probe at the desired measurement point, plug the MiniDin connector into the COMET device – done! The probe is ready for operation immediately, interchangeable without recalibration, and supplied with a calibration certificate. For optimal measurement, ensure adequate airflow or protection from direct radiation.

Available versions:

• Without cable
• 1-meter cable length
• 2-meter cable length
• 5-meter cable length
• 10-meter cable length
• 15-meter cable length

Summary:

• Digital probe with Mini-DIN connector for direct plugging or cable mounting
• The probe is supplied with a calibration certificate
• It is interchangeable without calibration with any specific device and independent of cable length

Scope of delivery:

• DIGIS/M depending on selected variant
• Traceable calibration certificate