COMET Pt1000TR125/0 Cryogenic Probe -190 to +150 °C

COMET Pt1000TR125/0 Cryo Probe –190 to +150 °C

The COMET Pt1000TR125/0 (TR125B Pt1000/3850) is a true universal cryogenic and high-temperature immersion probe with one of the widest measuring ranges on the market: from –190 °C (liquid nitrogen) to +150 °C. This means one single probe can practically cover all applications – from cryogenics and deep-freezing to laboratory, medical, and research use, as well as heating, hot water, and industrial processes.

The robust stainless-steel housing and the high-temperature and cryogenic-resistant, shielded Teflon cable allow for permanent use in liquids, gases, and on surfaces. The probe is completely IP67-tight and can remain permanently in water, glycol, oil, LN₂, or other non-aggressive media.

The Pt1000 sensing element in Class A guarantees the highest accuracy over the entire wide temperature range and remains stable even under extreme conditions. The probe is supplied without a connector. It can be connected directly to COMET transmitters (T4411, T3419, P8510, etc.), data loggers, or any PLC with a Pt1000 input.

Whether monitoring liquid nitrogen tanks, deep-freeze storage, ovens, hot water tanks, or laboratory equipment – with the TR125/0, you only need one probe type.

Why the COMET Pt1000TR125/0 is the ultimate universal probe:

• Gigantic measuring range –190 to +150 °C – one probe for almost everything
• Cryo-capable down to liquid nitrogen – perfect for LN₂ applications
• Pt1000 Class A – highest accuracy across the entire range
• Stainless steel housing + Teflon cable – extremely temperature-resistant
• Completely IP67 sealed – permanently submersible
• Fast response time – ideal for control and alarm systems
• Shielded silicone cable – remains flexible between –190 °C and +150 °C
• Without connector – freely configurable
• Universally applicable – laboratory, medical, industrial, heating, cryogenic
• Made in EU – SENSIT / COMET premium quality

Technical data:

• Measuring range: –190 °C to +150 °C
• Sensing element: Pt1000/3850 ppm/°C, Class A
• Connection: 2-wire, without connector
• Housing material: Stainless steel
• Cable: Teflon, shielded, cryogenic and heat-resistant
• Cable length: according to selection
• Protection class: IP67 – permanently submersible
• Application: gaseous, liquid, and solid media
• Manufacturer: SENSIT s.r.o. (COMET System Partner)

Typical applications:

• Liquid nitrogen tanks (LN₂)
• Deep-freeze and shock-frost storage
• Medical and pharmaceutical cryo storage
• Laboratory and research cooling
• Heating, hot water, and solar systems
• Process monitoring in chemical and food industries
• Cryo preservation and biobanking
• Universal temperature measurement in extreme environments

Installation:

Immerse, screw in, or fasten with a clamp. The Teflon cable remains flexible and functional even at –190 °C to +150 °C – ideal also for very low temperatures.

Available versions:

• Cable length 1 meter
• Cable length 2 meters
• Cable length 5 meters
• Cable length 10 meters

Summary:

• Multipurpose thermometer, waterproof (IP67), –190 to +150 °C
• Accuracy class B
• Stainless steel 17240 with Teflon cable in the above lengths, without connector
• Probe: diameter 5 ± 0.1 mm, length 50 mm
• The design allows faster response to temperature changes compared to sensors with a protective tube.

Scope of delivery:

• Sensor with selected cable length (as above)
• User manual including warranty certificate