COMET Pt1000TG3/0 Ultra-Thin Probe 3 mm -50 to +200 °C

COMET SN252 Pt1000TG3/0 Ultra-thin Probe 3 mm –50 to +200 °C

The COMET SN252 (Pt1000TG3/0) is an ultra-thin, high-speed temperature probe with a diameter of only 3 mm – ideal wherever extremely fast and precise measurements are required with minimal disturbance to the measured medium. Thanks to its stainless-steel housing (DIN 1.4301) with a diameter of just 3 mm and high-quality Teflon cable, it reacts lightning fast: t0.5 ≤ 3 seconds, t0.9 ≤ 9 seconds – few probes are faster!

The measuring range from –50 to +200 °C combined with full IP67 sealing makes it perfect for narrow gaps, thin tubes, medical devices, laboratory applications, food processing, climate chambers, 3D printer heat beds, electronics testing, and wherever a standard 6 mm probe would be too large or too slow.

The shielded white Teflon cable is highly flexible, extremely chemical resistant, and withstands continuous exposure to +200 °C – ideal even in aggressive or sterile environments. The probe is supplied without a connector and can be directly connected to all COMET transmitters with Pt1000 input (T4411, T3419, P8510 etc.), data loggers, or any PLC.

With a Pt1000 Class A accuracy (±0.15 + 0.002 × |t|) °C, the SN252 ranks among the absolute top in precision – all within a minimal design.

Why the COMET SN252 is the fastest and thinnest professional probe:

• Only 3 mm diameter – fits into the narrowest gaps and thinnest tubes
• Lightning-fast response – t0.5 ≤ 3 s, t0.9 ≤ 9 s
• Measuring range –50 to +200 °C – suitable even for high-temperature use
• Pt1000 Class A – highest accuracy
• Shielded Teflon cable – chemically resistant, highly flexible, withstands +200 °C continuously
• Completely IP67 sealed – submersible and sterilizable
• Stainless steel DIN 1.4301 – food-grade and corrosion-resistant
• Without connector – freely configurable
• Perfect for medical, laboratory, food, and electronics applications
• 30‑month warranty

Technical data:

• Measuring range: –50 to +200 °C
• Accuracy: ±(0.15 + 0.002 × |t|) °C – Class A
• Sensor element: Pt1000 / 3850 ppm/°C
• Connection: 2‑wire, without connector
• Response time: t0.5 ≤ 3 s / t0.9 ≤ 9 s
• Housing material: Stainless steel DIN 1.4301
• Dimensions: Length 40 mm, diameter 3 mm
• Cable: Length according to selection, shielded, white
• Protection class: IP67
• Warranty: 30 months

Typical applications:

• Medical devices and sterilization
• Food core temperature in thin products
• 3D printer heat beds and nozzle temperature
• Laboratory and analytical equipment
• Thin‑walled tubes and capillaries
• Climate chambers and test cabinets
• Electronics and semiconductor testing
• Pharmaceutical and cleanroom technology

Installation:

Simply immerse, insert into gaps, or secure with tape or a cable tie. With only 3 mm diameter, the probe causes minimal disturbance to the medium.

Available versions:

• Cable length 1 meter
• Cable length 2 meters
• Cable length 5 meters
• Cable length 10 meters

Summary:

• The probes are designed for contact‑based temperature measurement of gases, liquids, and solids.
• The ultra‑thin housing with only 3 mm diameter ensures a fast response to temperature changes.
• The connecting cable is Teflon‑insulated and shielded.
• The sensors are universally applicable.
• The method of use must consider the temperature and chemical resistance of both housing and cable.
• The sensors are also suitable for use in chemically non‑aggressive environments.

Scope of delivery:

• Sensor with selected cable length (as specified above)