Monitoring System 100T - Room Monitoring Bundle

Room Monitoring Bundle: Climate, Motion, and Video Surveillance in One Solution

This Didactum bundle combines the Monitoring System 100T with a temperature, humidity, and door contact sensor, a microwave motion detector, an alarm siren with strobe light, and a USB dome camera into a complete room monitoring solution. The bundle thus covers climate monitoring, motion and access detection, as well as visual evidence capture for a room – including immediate optical and acoustic alarming in an emergency.

The Monitoring System 100T forms the central control and alarming unit: it is integrated into the network via Ethernet, is fully configurable through a web browser, and requires no additional software. Temperature, humidity, door contact sensor, and motion detector are connected directly to the analog ports, the alarm siren to the relay output, and the USB dome camera to the USB port – all components are automatically detected or immediately controllable.

The complete CAN bus port of the 100T remains free, so additional CAN sensors or expansion units can be added at any time – without having to replace the central unit.

This bundle includes:

Seven coordinated Didactum products that together form a complete room monitoring solution with climate, motion, and video functionality.

Monitoring System 100T

The Monitoring System 100T is the central control unit of the bundle and the latest generation of Didactum's high-end monitoring systems, developed and manufactured in the European Union. It operates entirely independently via an integrated web server, requires no additional software installation, and, thanks to its hardened Linux operating system and built-in watchdog, is designed for permanent 24/7 operation in critical environments such as offices, server rooms, or sensitive business areas. Four analog ports, a CAN bus port, a USB port, and relay outputs allow sensors, cameras, and alarm devices to be automatically detected or directly controlled, while integration into SNMP, Modbus TCP/IP, or Syslog-based monitoring environments such as Zabbix, PRTG, or Nagios is achieved without extra effort. With 10/100/1000 Mbit/s Ethernet and an optional LTE modem, the 100T can be further tailored to the respective infrastructure.

Temperature Sensor

The temperature sensor included in the bundle serves to precisely monitor and measure the interior temperature of the room and is connected directly to an analog port of the Monitoring System 100T via an RJ11 connector. The device automatically detects the sensor, displays it in the web interface, and allows individual configuration of threshold values and notifications there. The sensor is wired, with a 2-meter cable included, and can be placed up to 100 meters from the central unit if needed.

Humidity Sensor

The humidity sensor in the bundle complements the temperature sensor by measuring relative humidity and is likewise connected directly to the Monitoring System 100T via an analog port. With compact dimensions of just 60 × 18 × 18 mm and a power consumption of only 60 mW, it is space-saving and energy-efficient. Via the connection cable, which can optionally be extended up to 50 meters, the sensor can be flexibly placed wherever humidity actually needs to be monitored.

Door Contact Sensor

The door contact sensor included in the bundle handles access monitoring for the room and consists of a magnet and a sensor unit that together reliably detect whether a door is open or closed. It is connected to another analog port of the Monitoring System 100T and can, if needed, be chained with up to 10 additional sensors, allowing multiple doors to be monitored simultaneously. Every unauthorized opening is immediately logged and can automatically trigger a notification or the bundle's alarm siren.

Microwave Motion Detector

The microwave motion detector included in the bundle uses Doppler-principle radar technology to reliably detect movement and the presence of people – even through non-metallic obstacles such as glass, plastic, wood, or thin walls. It is connected to another analog port of the Monitoring System 100T via an RJ11 connection and is ready for use immediately via plug-and-play. The sensor is available with a detection range of 4, 6, or 8 meters, covers a detection angle of 120°, and is thus ideally suited for securing rooms outside business hours. Detected movements can be directly linked to the alarm siren and camera recording in the web interface.

Alarm Siren with Strobe Light

The alarm siren with strobe light provides immediate acoustic and optical alarming directly on site within the bundle as soon as one of the sensors reports a critical condition – for example an unauthorized door opening, detected motion, excessive temperature, or excessive humidity. It is connected directly to a 12V DC relay output of the Monitoring System 100T via the included 3-meter connection cable and is automatically activated in the event of an alarm. With a sound pressure level of 108 dB and a red strobe light flashing at 2.5 Hz, it reliably draws attention even in larger or noisier environments. Thanks to IP54 protection and a rugged ABS housing, it is also designed for permanent use in technical rooms.

USB Dome Camera

The USB dome camera adds visual monitoring of the room to the bundle and is connected directly to the USB port of the Monitoring System 100T via the included 5-meter USB cable. Thanks to plug-and-play, it is automatically detected, and no additional driver installation is required; power is supplied directly by the central unit. The camera delivers an MJPEG stream in 720P HD quality with 1.0 megapixel resolution and features 24 built-in infrared LEDs for clear footage even in darkness, with an IR range of up to 20 meters. The web interface can be configured so that the camera automatically records as soon as the door contact or motion sensor reports an event, with recordings stored or transmitted via email, SD card, or FTP.

Comprehensive Sensor Integration for the Bundle

The Monitoring System 100T supports up to 100 sensors, contacts, and relays simultaneously – in the base configuration, up to 36 sensors directly via the analog ports and CAN bus. The temperature, humidity, door contact sensor, and motion detector already occupy all four analog ports in the bundle; the alarm siren is controlled via a relay output and the USB dome camera via the USB port – the complete CAN bus port remains free for future expansion.

Since all four analog ports are occupied by the bundle, any further sensor expansion takes place exclusively via the fully free CAN bus port – for example through additional smoke, water, or vibration sensors as well as sensor expansion units. This allows the bundle to be expanded at any time from solid basic room monitoring protection into a comprehensive monitoring network.

Real-Time Monitoring and Automated Alarming

The Monitoring System 100T reacts immediately to critical values from all sensors in the bundle. When threshold values are exceeded, the system automatically sends email notifications and SNMP traps, activates the included alarm siren via the relay output if needed, and can simultaneously trigger the USB dome camera for video recording. With an optionally installed LTE modem, SMS and Web-to-SMS notifications are also possible. Integration into monitoring software such as Zabbix, PRTG, Nagios, or Check_MK is straightforward thanks to common network protocols (HTTP, HTTPS, SMTP, FTP, SNMP, Syslog, Modbus TCP/IP, DHCP).

Web-Based Control & Intelligent Automation

The multilingual web interface allows easy management of all bundle components as well as alarms and scenarios – right from initial setup.

• Temperature > 30 °C → turn on ventilation, trigger alarm
• Humidity > threshold value → send email to administrator
• Door opened → activate alarm siren, send notification
• Motion detected → start camera recording, send image via email
• Alarm event overnight → additionally send SMS to security service (with optional LTE modem)

The Monitoring System 100T can also be used as an I/O controller for air conditioning, lighting, or fans – ideal for room and building management as well as preventive maintenance.

Full Control

Control the central unit, climate sensors, motion and access monitoring, alarm siren, and camera together – all through an intuitive, web-based interface.

• Monitor real-time data from temperature, humidity, door contact, and motion sensors together
• Retrieve live footage and recordings from the USB dome camera
• Create automated actions based on defined conditions
• Send email, HTTP request, SNMP, or other notifications
• Visualize trends and logs for better decision-making
• Manage users, permissions, and access securely at three levels

Scalable, Reliable, and Future-Proof

The Monitoring System 100T in the bundle is equipped with 10/100/1000 Mbit/s Ethernet (Gigabit). The system supports up to 700 elements (sensors, triggers, logic schemes, notifications). Since the temperature, humidity, door contact sensor, and motion detector already occupy all four analog ports, and the siren is controlled via a relay output while the camera uses the USB port, the fully free CAN bus port is available for further sensor technology. Regular firmware updates ensure long-term usability. Made in the EU – German support included.

Connecting CAN Sensors

Since all four analog ports are already occupied in the bundle, any further sensor expansion takes place via the CAN bus port, which remains fully free in the bundle. This port allows additional CAN devices to be connected together in a chain – up to 24 CAN devices per chain are recommended, with a maximum of 32 devices per port. Each 8-port sensor expansion adds 8 additional analog sensors to the system, while each dry contact expansion unit adds 32 or 64 additional dry contact inputs. The total length of the CAN bus can be up to 230 m; an additional CAN power supply (12V/1A) is only needed if the number of CAN devices in the chain exceeds the recommended limit.

Motion, Access, and Video Surveillance

The door contact sensor, microwave motion detector, alarm siren, and USB dome camera already form a complete security package for the monitored room within the bundle.

• Door contact sensor detects unauthorized door openings
• Motion detector captures unauthorized movement, even through non-metallic obstacles
• Alarm siren warns acoustically and optically directly on site
• USB dome camera provides live footage and automatic video evidence during alarm events

All sensor and alarm data is also logged with a timestamp, which supports companies with ISO 27001, GDPR, or industry-specific audits.

Commissioning in a Few Minutes

Setting up the bundle is simple and quick – with no additional software required.

1. Place the Monitoring System 100T at the desired location and connect it to your network via an Ethernet cable – the system starts automatically
2. Open the device's default IP address in a browser and go through the setup wizard
3. Connect the temperature and humidity sensors to one analog port each – automatic detection
4. Mount the door contact sensor on the door, place the motion detector in a suitable location in the room, and connect both to another analog port each
5. Connect the alarm siren to the relay output and the USB dome camera to the USB port
6. Define alarm rules in the web interface, for example linking motion detection with the siren and camera recording
7. Set threshold values and notification types for all sensors in the web interface

What's Included in the Delivery

Please check the delivery for completeness upon receipt and report any missing or damaged parts to your supplier immediately.

• Didactum 100T monitoring unit1 piece
• 12V DC power adapter1 piece
• Ethernet cable1 piece
• OTG USB-C cable1 piece
• Monitoring System 100T quick guide1 piece
• Warranty card1 piece
• Temperature sensor incl. 2 m connection cable1 piece
• Humidity sensor1 piece
• Door contact sensor incl. mounting bracket1 piece
• Microwave motion detector1 piece
• Alarm siren with strobe light1 piece
• USB dome camera1 piece

Why This Bundle Is the Right Choice

Practical Application Examples

• Climate, motion, and access monitoring of offices, technical rooms, and sensitive areas
• Immediate on-site alarming in case of unauthorized access or detected movement outside business hours
• Automatic video evidence capture during alarm events thanks to the USB dome camera
• Securing storage, archive, or production areas
• Expandable base for additional sensor technology via the free CAN bus port
• Remote monitoring of branches or remote sites via LTE modem
• Verifiable event logging for audits and compliance

This bundle of the Monitoring System 100T, temperature sensor, humidity sensor, door contact sensor, microwave motion detector, alarm siren, and USB dome camera combines central IT and room monitoring, precise climate measurement, motion detection, and immediate on-site alarming including video evidence in one ready-to-use solution.

More About the Bundle

Frequently Asked Questions