Akuvox AV-R20K-2 Video Door Intercom System
€247.00
The Robust 2-Wire Video Door Intercom with Keypad
The Akuvox AV-R20K-2 is a compact SIP video door intercom with an aluminium front panel and integrated keypad, specifically designed for retrofitting existing 2-wire cabling. Many residential and office buildings still have older 2-wire wiring from analog intercom systems, the replacement of which would be complex. The AV-R20K-2 makes this existing cabling usable to operate a modern, IP-based SIP intercom system – without having to lay any new cables. According to the manufacturer, it is typically used for retrofitting residential and office buildings and is space-saving as well as certified for outdoor use.
A single 2-core cable simultaneously provides power and network connectivity. To integrate it into an IP network, the 2-wire cabling is connected to the rest of the network via a suitable Akuvox 2-wire switch or adapter (e.g. NS-2 or NC-2). There is no classic Ethernet port or Wi-Fi on the door station itself.
The integrated keypad allows secure PIN entry directly at the door – in addition to the 2-megapixel Full HD camera with infrared night vision, a card reader, and the weatherproof IP65 housing.
Video, Audio and Access over 2 Wires
The AV-R20K-2 combines all the essential functions of a professional door intercom in a compact, robust housing.
Full HD Camera with IR LED
2-megapixel camera with infrared supplementary lighting for a clear image even at night.
2-Wire Connection
Power and network over a single 2-core cable, ideal for retrofitting.
Keypad
Physical keyboard for PIN entry directly at the door station.
Dual Audio with Anti-Echo
Clear, lag-free conversations thanks to echo cancellation and noise filtering.
SmartPlus App
Call answering, live image and door opening on the go via smartphone.
How the AV-R20K-2 Is Built
The housing of the AV-R20K-2 is deliberately kept narrow so that the device can also be installed in tight wall niches or next to door frames.
Aluminium Front Panel
The front is made of robust aluminium instead of plastic, giving the device additional mechanical stability for continuous use.
Camera Section with Night Vision
Camera lens with a field of view of 110° horizontal and 58° vertical, supplemented by infrared LEDs, a light sensor and an infrared sensor for detecting activity in front of the door.
Keypad with Card Reader
Below the camera is the illuminated keypad for PIN entry, supplemented by an integrated card reader for 13.56 MHz cards.
Microphone and Speaker
A discreetly installed microphone and speaker handle the voice connection with dual-audio and anti-echo technology.
2-Wire Connector on the Rear
On the rear are the 2-wire connector for power and network, a relay output, an input, as well as interfaces for Wiegand and RS485 for connecting external access components.
Mounting Type and Tamper Protection
The housing can be mounted either flush or surface-mounted and is equipped with a tamper alarm against forced removal.
Flexible Ways to Open the Door
Depending on the use case, the AV-R20K-2 can be used in different ways for access control. According to the manufacturer, the door station even supports combined release by card and PIN.
- Release via a connected indoor video station in the building
- Presenting a 13.56 MHz card at the integrated reader
- PIN entry via the keypad
- Remote opening via the Akuvox SmartPlus app, even while on the go
Practical example: An existing building with old 2-wire cabling receives a modern video door intercom without any new cabling. Residents open the door either by card, PIN code or smartphone app, while visitors ring the doorbell as usual and are received via video.
Reliable Images Even in the Dark
The camera of the AV-R20K-2 is permanently active and automatically adapts to the lighting conditions.
- Camera permanently in operation – no manual wake-up required
- Infrared LEDs for recordings in complete darkness
- Automatic white balance for natural color reproduction
- Minimum illumination of 0.1 lux for recordings in very low light
- Multi-Way Unlock: combined release by card and PIN possible
- Infrared sensor and tamper alarm for additional security
Integration into Existing Systems
The AV-R20K-2 is designed as an open SIP device and can be used both standalone and in larger access control and video environments.
SIP
Direct integration into IP telephone systems and SIP-capable endpoints.
ONVIF
Connection of the camera image to common video management and surveillance systems.
Wiegand & RS485
Connection of external access readers or serial third-party devices via two open interfaces.
Capacity
Locally up to 4,000 users, 1,000 contacts, 20,000 cards and 4,000 PIN codes manageable.
The integrated NFC reader for door opening via smartphone (instead of a card) only works with Android devices according to the manufacturer. iPhone users open the door instead via the Akuvox SmartPlus app, by card or by PIN entry on the keypad.
Maintenance and Operation from Afar
For professional operation and remote maintenance, the AV-R20K-2 offers several administrative functions.
- Auto-provisioning for automated initial setup
- Management via a web-based management portal
- Web-based packet dump for network diagnostics
- Backup and restore of the configuration
- Export of access logs (Entry Logs)
- Export and import of access tables
- Firmware updates via the web interface
- System logs including door access logs
Robustly Built for Continuous Use
As a door station, the AV-R20K-2 is exposed to the elements and potential sabotage – the design is accordingly engineered for continuous operation.
- Aluminium front panel for additional mechanical robustness
- IP65 protection rating against dust and water jets, certified by the manufacturer for outdoor use
- Integrated tamper alarm in case of forced removal
- Infrared sensor for additional environmental detection
Commissioning in Just a Few Steps
Setting up the AV-R20K-2 can be completed quickly even when retrofitting.
- Decide on mounting type: flush or surface-mounted
- Connect the door station to the existing 2-wire cabling
- Connect the 2-wire cabling to the IP network via a suitable Akuvox 2-wire switch or adapter
- Perform basic setup via the door station’s web interface
- Install the Akuvox SmartPlus app on the smartphone and link the device
- Optional: Enroll cards and PIN codes as well as wire the relay/input for the door opener
Why the AV-R20K-2 Is a Good Fit
No New Cabling
Uses existing 2-wire lines from older intercom systems.
Integrated Keypad
Secure PIN entry directly at the door, also combined with card.
Compact & Robust
Slim aluminium housing certified for outdoor use.
Night Vision
IR LEDs for clear images even in complete darkness.
Flexible Mounting
Can be installed either flush or surface-mounted.
Open Standards
SIP, ONVIF, Wiegand and RS485 for flexible integration.
Practical Application Examples
- Modernization of existing 2-wire intercom systems without new cabling
- Retrofitting of residential and office buildings with PIN-based access
- Access point for narrow wall niches or tight door frames
- Addition to existing SIP telephone systems as an extra door intercom station
- Integration into ONVIF video surveillance for documenting visitors
- Connection of external access readers or third-party devices via Wiegand/RS485
The Akuvox AV-R20K-2 combines robust construction, PIN-based access and the ability to retrofit over existing 2-wire cabling in a compact, weatherproof door station – a durable solution for existing buildings without modern network infrastructure at the door.
More about the Akuvox AV-R20K-2
Akuvox Knowledge Base
Guides, configuration help and further documentation directly from the manufacturer.
Go to Knowledge Base →Frequently Asked Questions
What is the Akuvox AV-R20K-2 and what is it used for?
The Akuvox AV-R20K-2 is a compact SIP video door intercom with an aluminium front panel and integrated keypad, specifically designed for retrofitting existing 2-wire cabling. According to the manufacturer, it is typically used for retrofitting residential and office buildings.
How exactly does the 2-wire connection work?
A single 2-core cable simultaneously provides power and network connectivity for the door station. This cabling is connected to the rest of the IP network via a suitable Akuvox 2-wire switch or adapter. There is no classic Ethernet port or Wi-Fi on the AV-R20K-2 itself.
How can the door be opened?
The door can be opened via a connected indoor video station, the integrated card reader (13.56 MHz), PIN entry on the keypad, or the Akuvox SmartPlus app on a smartphone. According to the manufacturer, combined release by card and PIN is also possible.
Can the AV-R20K-2 be flush-mounted?
Yes. According to the datasheet, the AV-R20K-2 is designed for both flush and surface mounting.
How many users, cards and PIN codes can the AV-R20K-2 manage?
The AV-R20K-2 can locally manage up to 4,000 users, 1,000 contacts, 20,000 cards (EM, Mifare, DESFire EV1/EV2/EV3) as well as 4,000 PIN codes.
Can the AV-R20K-2 be integrated into existing systems?
Yes. Via SIP the AV-R20K-2 can be integrated into existing IP telephone systems, via ONVIF into video management software, and via Wiegand or RS485 external access components or third-party devices can be connected.
Questions about the AV-R20K-2?
Our support team in Germany provides free advice on selection, retrofitting and setup.
YouTube
Akuvox AV-R20K-2
General Data
- Button: 1 doorbell button
- Keypad: with keys
- Microphone: -40 dB
- Speaker: 4Ω / 3W
- Door opening: video station (optional accessory), card reader (13.56 MHz RFID), PIN code, mobile app
Video
- Image sensor: 1/2.8" CMOS image sensor
- Light sensitivity: 0.1 Lux
- Maximum resolution: 1080 × 1920 @ 25 fps
- Selectable resolution: 1080p, 720p, 4CIF, VGA, CIF
- Video codec: H.264
- Light support: IR LED
- Light sensor: yes
- Viewing angle: 110° (horizontal), 58° (vertical)
- Image functions: automatic white balance
Audio
- Audio codecs: G.711a, G.711μ, G.722
- DTMF: in-band, out-of-band DTMF (RFC2833), SIP Info
- Anti-echo function: yes
- Voice activation detection: yes
- Comfort noise generator: yes
Network
- Protocols: IPv4, HTTP, HTTPS, FTP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP
- SIP support: SIP v1 (RFC2543), SIP v2 (RFC3261)
- ONVIF support: yes
Connections
- Communication: 2-wire
- Alarm contacts: 1 × input, 1 × relay output
- Card slot: no
- Interfaces: Wiegand, RS485
- Power supply: 48V DC (via 2-wire)
Environmental Conditions
- Operating temperature: -30 °C ~ +60 °C
- Storage temperature: -40 °C ~ +70 °C
- Humidity: 10 - 90% (non-condensing)
- Weather / dust protection: IP65
Certifications
- CE, FCC, RCM, NDAA compliant
Dimensions
- 84.5 × 185 × 24 mm (W × H × D)
Compatible mounting brackets
Door lock security module
ID tags/cards
Video stations
Manufacturer Information:
AKUVOX (XIAMEN) NETWORKS CO., LTD.
10/F, No.56 Guanri Road
Software Park II
Xiamen 361009
China
Tel: +86-592-2133061
Email: sales@akuvox.com
Responsible person:
Didactum® Security GmbH
Im Mühlenfeld 4
48163 Münster
Deutschland
Fon:
(+49) 2501 92 90 160 oder (+49) 171 33 11 577
Email: info@didactum-security.de
