Monitoring System 500T IT Basic Protection

All-in-one Monitoring System 500T with sensors for temperature, humidity, water, and smoke monitoring.

€888.15

% €955.00 (7% saved)

Extension Modules

Modem

Power Supply

Product number: DI19004.1

Delivery time: 1-2 weeks

Comprehensive IT Monitoring System 500T with Sensors for Temperature, Humidity, Water, and Smoke

This bundle includes:

Monitoring system of the 500 series (Didactum Monitoring System 500T)
Temperature sensor
Humidity sensor
Water sensor
Smoke sensor

IT Monitoring System 500T for Continuous Monitoring of Critical Rooms and Equipment

The new Monitoring System 500T provides customers with a proven solution for protecting business-critical rooms and infrastructure. This networked remote monitoring system is suitable for cross-industry use. It is ideal for continuous monitoring of IT infrastructure (server room / data center) as well as production, logistics, and technical environments. This networked all-in-one measurement and monitoring system is a so-called monitoring appliance. Its architecture is based on a smart combination of advanced hardware and software. A key advantage is that the 500T system operates as a stand-alone unit – perfect for monitoring heterogeneous IT environments.

Optionally, this monitoring system can be integrated into SNMP-compatible management software. Should the physical or virtual server with installed monitoring software fail, the advanced 500T Monitoring System will still reliably alert you and your team.

Typical applications of this monitoring system include:

Temperature and humidity monitoring in storage, logistics, and server room environments
Remote monitoring of unmanned technical rooms, power supply, and telecom systems
Rack monitoring of existing control, network, and server cabinets
Infrastructure monitoring of data center environments

Features of the Ethernet-based Monitoring System

The 500T IT Monitoring System features a powerful CPU, Linux-based OS, integrated web server, and multilingual web interface. It includes a real-time clock with NTP synchronization and watchdog timer. Supported protocols include CAN, DHCP, HTTP, HTTPS, SNMPv1/v2c/v3, SNMPget, SMTP, FTP, RADIUS, SYSLOG, TLS, STARTTLS. System alerts and status changes are sent instantly via email, FTP, Syslog, or SNMP.

8 Ports for Sensors to Monitor IT Infrastructure

The 500T Monitoring System features 8 RJ-11 ports for analog, IP-enabled sensors. Following a modular approach, you can select from a wide range of sensors to protect and monitor your critical areas and systems. Create a tailored solution for 24/7 environmental monitoring.

CAN Bus Port for CAN Sensors and Expansion Units

The 500T IT Monitoring System includes a CAN bus interface. CAN stands for Controller Area Network, a long-established industrial fieldbus protocol. If you need more sensors, simply connect a CAN sensor expansion unit. Up to 8 additional analog sensors can be plugged in via Plug & Play. You can also connect digital CAN sensors such as combined temperature-humidity or temperature-humidity-smoke sensors. Up to 8 CAN units or sensors can be linked to a single 500T monitoring device.

In total, up to 64 sensors or dry contacts can be monitored in real time with a single Monitoring System 500T. The CAN connection can extend up to 225 meters in length.

Integrated Logic for Notifications and Alarms

The system supports alerts and notifications via email, SMS (modem required), and SNMP traps. You can group sensors and define logical rules for triggered actions.

Didactum Temperature Sensor – Temperature Monitoring of Critical Infrastructure

Monitor the critical environmental factor of temperature in your sensitive infrastructures. Prevent unnoticed overheating in critical rooms and systems. Permanent temperature recording supports compliance and auditing requirements.

Typical uses of the Didactum temperature sensor:
Temperature monitoring of technical and server room infrastructure
Long-term temperature logging in warehouses, depots, and archives
Temperature monitoring of network, technical, and server cabinets
Temperature monitoring of cold storage and industrial buildings

This sensor is specially designed for precise temperature monitoring. It connects easily via RJ11 to the Didactum Monitoring System and is automatically displayed in the web interface. You can access the sensor via network or Internet.

Didactum Humidity Sensor – Monitoring Relative Humidity

Relative humidity (RH) is crucial in many business-critical environments. Low humidity can cause static discharge. In server rooms, low RH may damage sensitive components, while high RH can cause condensation.

These microscopic water droplets can settle on circuit boards and cause shorts.

Typical uses of the Didactum humidity sensor:

Humidity measurement in technical and server room infrastructures
Humidity measurement in production environments
Long-term RH logging in warehouses, depots, and archives
Monitoring HVAC systems
Building automation
Facility and building technology
Mold prevention (e.g., black mold)

Easy Installation of the Didactum Humidity Sensor:

Connecting the sensor is simple: just plug it in with a 4-wire patch cable to the IP-based monitoring system. The sensor can be installed up to 50 meters away. It is auto-detected and shown in the web interface. Includes mounting accessories (screws/mounting tape).

Didactum Water Sensor – Reliable Detection of Water and Condensate

For water and moisture detection, Didactum has developed a leak sensor compatible with all Didactum systems. It connects via RJ-12 cable and is auto-detected in the web GUI, where you can define the alert method (email, SMS, SNMP).

Quick and Easy Installation:

The sensor is delivered with screws, mounting tape, and a 2-meter RJ-12 cable. Optionally, it can be installed up to 100 meters from the monitoring system.

Didactum Smoke Sensor – Early Detection of Fire and Smoke

The Didactum smoke sensor is designed for early fire/smoke detection and is compatible with all Didactum systems. It connects via RJ-12 and is auto-displayed in the web GUI.

Up to 15 smoke detectors can be daisy-chained to monitor additional rooms. Use RJ-12 patch cables for chaining. The chain can extend up to 150 meters. Note that chained detectors send a general alarm only.

Set alarm types for fire or smoldering fire in the easy-to-use Didactum web interface. Ensure early warning of fire and smoke in business-critical environments.

Device Management: Web, SNMP

Sensor Access: Three levels via login

LAN: Ethernet 10/100 Mbit

Operating System: Linux

Interface: Any browser

RAM: 128 MB

CPU Speed: 720 MHz

Total Number of CPU Cores: 2

Clock: Built-in clock

Timer: Integrated watchdog

Max Number of Sensors – Physical Sensors, Dry Contacts, Relays: 130

Max Number of Elements – Notifications, Triggers, Timers, Logic, Sensors, Dry Contacts, SNMP Get, SNMP Trap, Dial Tasks and other Elements: 1000

LTE Gateway Mode: Internet access (routing for internal network) (Modem ordered separately)

LTE Access Mode: Internet access via LTE (Modem ordered separately)

Network Protocols: DHCP; HTTP; HTTPS; SNMP v1, v2c, v3; SMTP; FTP; Syslog; TLS (v1.0, v1.1, v1.2, v1.3)

Modbus RTU: Via extension

RS485 / OSDPv2 – Reader Access Control: RS485 / OSDPv2: Reader Access Control

Modbus TCP / IP: Yes

Static Routing: Yes

Dynamic DynDNS: Yes

Access via RADIUS Server: Yes

VPN – Secure data communication; secure connection switching between LTE and LAN: Yes

SSL Installation: Yes

NTP Server: Yes

Alarm Types – Email, FTP log, Syslog, SMTP, SNMP Traps, SMS (Modem ordered separately), Web-to-SMS: Yes

Max Number of "Mail To" Recipients in One Email Notification: 20

Max Number of "SMS To" Recipients in One SMS Notification – Also Max Number of Phone Numbers: 20

Pings – Built-in Function for Server Ping: Yes

IP Cameras: 4

SNMP Query: Yes

User Key: Yes

Logic Schemes: Yes

Timer: Yes

Trigger: Yes

SNMP Traps: Yes

Virtual Math Element (Combine Multiple Sensor Data and Calculate New Data): Yes

Logic Schemes: Yes

Modbus TCP/IP: Yes

Energy Efficiency: A

Power Supply Input (24 ÷ 48V DC): x2 inputs possible

Power Supply Input (12V DC): x1 input possible

Fuse: 1A

Min. Power Consumption: 1 Watt

Max. Power Consumption: 10 Watt

Max. Current Load at Relay: 10A

Redundant Power Supply: AC/DC and DC/DC

Relay Outputs – 12V 0.25A: 2

Relay Outputs – Holding Relay 240V*10A: 2

Analog Port: 8 integrated ports, expandable with expansion unit

CAN Port: x1 port, max. 32 devices

Inputs for Dry Contacts: 16

Modbus RTU (RS-485): Via optional extension module

OSDP v2 Reader Extension: Via optional extension module

USB Cameras: 1

IP Cameras: 4

Ethernet Port: 1

USB 2.0 Type C: 1

Switch Normal / Recovery: Yes

Micro SD Card Slot (SDXC up to 512 GB): Yes

SD Card Formatting Function (FAT32): Yes

USB Stick: Yes

Send System Log via Email: Yes

Sensor Dump Files: Yes

Syslog: Yes

Send to FTP Server: Yes

Max Number of Log Files – 10,000 Logs/Days = 27 Years: Yes

Sampling Rate/Period (Logs, Charts): 1s

Modem LED – STATUS: Yes

Integrated Temperature Sensor: Yes

12V 0.25A Outputs – STATUS (e.g., E1, E2): x2

Operating Temperature: -10 to 70 °C

Storage Temperature: –25 to 85 °C

Operating Humidity: 0 to 90 %, non-condensing

Storage Humidity: 0 to 95 %, non-condensing

Mounting: 19" 1U

Housing: Sheet metal

Dimensions (L x W x H) in mm: 440x44x90

External Housing Grounding: Yes

Dashboard Panel: Yes

Overall Statistics Panel: Yes

System Tree Panel: Yes

Dry Contact Outputs Panel: Yes

Dry Contact Inputs Panel: Yes

List of Last Sent SMS Messages: 200

Temperature Sensor

Sensor Type: Analog Sensor

Measures: Temperature

Accuracy: ± 0.5 °C at room temperature

Daisy Chain: No

Cable Length: 2 m

Power Consumption: 60 mW

Operating Temperature: Optimal range: -10° C to +80° C

Operating Humidity: 0 to 95%

Mounting Options: Tabletop, indoor, rack, wall mount

Max Distance to Unit: 100 m

Output Connections: RJ-11 / 6P4C

Humidity Sensor

Sensor Type: Analog Sensor

Measures: Relative Humidity

Accuracy: 3% RH

Daisy Chain: No / Max Distance to Unit: 50 m

Cable Length: RJ11 6P4C 2 m phone cable included

Power Consumption: 60 mW

Operating Temperature: Optimal range: -10° C to +80° C

Operating Humidity: 0 to 95% indoor

Mounting Options: Tabletop, indoor, rack, wall mount

Water Sensor

Sensor Type: Analog Sensor

Detection: Capacitive

Accuracy: 3% RH

Daisy Chain: No

Description: The sensor has two RJ ports. RJ 6P4C connects to the analog input of the Didactum monitoring system. RJ 4P2C connects the leakage sensor to two poles.

Dimensions: 60×18×18 mm

Inputs: 2-wire (WDC cable)

Outputs: RJ11 / RJ12 (6P4C)

Operating Temperature: -10 °C to +80 °C

Operating Humidity: 5% to 95% (non-condensing)

Power Consumption: 60 mW

Mounting: Mounting bracket included

Max Distance: 100 m from monitoring and extension unit

Response Time: 15 seconds

Recovery Time: Depends on how quickly the sensor dries

Smoke Sensor

Device Type: Analog Sensor

Sensor Type: Photoelectric

Measures: Smoke, Fire

Daisy Chain: Yes, up to 10 sensors in a chain. The system displays all sensors in a chain as one element. Triggering any sensor in the chain activates the element in the web interface.

Cable Length: RJ11 / RJ12 6P4C, 2 m phone cable included

Power Consumption: 100 mW

Operating Temperature: Optimal: -10 °C to +55 °C – Extended: -10 °C to +80 °C

Storage Temperature: -10 °C to +55 °C

Operating Humidity: 5 to 95% (non-condensing)

Storage Humidity: 5 to 95% (non-condensing)

Average Lifespan: ≥10 years

LED Indicator: Red LED

Mounting Options: Ceiling mount

Max Distance to Unit: 150 m from unit or expansion module

Max Mounting Height: 6 m