Comet PA8652 – Sensor for Digital Probes and Binary Inputs with PoE
The Comet PA8652 is a versatile, low-cost sensor for digital probes and binary inputs, featuring PoE support
€250.00
The Comet PA8652 is the versatile low-cost Ethernet sensor for up to 4 digital temperature or humidity probes and 3 binary inputs. With PoE, 12V output for detectors and web interface – perfect for comprehensive environmental monitoring
The Comet PA8652 is the most versatile model in the PAx6xx series. It allows the connection of up to four digital temperature or combined temperature-humidity probes as well as three binary inputs for detecting states (e.g., door contact, flood detector or other two-state signals).
A special highlight is the option to power connected detectors directly with 12 V from the device – even during PoE operation. This eliminates the need for additional power supplies and significantly simplifies installation.
The binary inputs are flexibly configurable for voltage signals, dry contacts or two-wire flood detectors. The PA8652 is the ideal solution for comprehensive environmental monitoring, where binary states such as flooding, door opening or device status must be recorded in addition to temperature and humidity.
Why the Comet PA8652 is the best low-cost sensor:
- Connection of up to 4 digital probes
- 3 binary inputs for status monitoring
- 12 V supply for external detectors (also with PoE)
- Probe cable length up to 40 meters per channel
- Power over Ethernet (IEEE 802.3af) or 15-24 V DC
- Integrated memory and backup function
- Modern web interface with IPv4/IPv6
- Modbus TCP, SNMPv3 and COMET Cloud
- Encrypted communication (HTTPS, TLS)
- Detachable mounting bracket for easy installation
Technical data:
- Up to 4 digital temperature or T+RH probes
- 3 binary inputs (voltage, dry contact, flood detector)
- Maximum probe length: 40 meters per channel
- Power supply: PoE or 15-24 V DC
- Operating temperature: -30 to +60 °C
- Protection class: IP30
- Dimensions: 116 x 85 x 42 mm
- Weight: 180 g
- Communication protocols: HTTP(S), Modbus TCP, SNMPv3
- Measuring interval: 2 seconds
Scope of delivery
- PA8652 Ethernet Sensor
- Operating manual
- Traceable calibration certificate
- Free full version of COMET Vision software
- COMET Cloud for 3 months
- NO power supply included
- NO probes included
Comet PA8652 - Cost-effective sensor for digital probes and binary inputs with Ethernet and PoE
General Data
- Versatile measuring device of the PAx6xx series for temperature, humidity, and status monitoring
- Supports digital temperature probes as well as combined temperature/humidity probes
- 3 binary inputs for acquiring states or connecting external detectors
- Binary inputs configurable for:
- Voltage signals
- Potential-free contacts
- Two-wire water detectors
- Power supply of external detectors with 12 V directly via the device possible
- Supports cable lengths for sensors up to 40 m
- Integrated backup memory
- Modern web interface with IPv4/IPv6 support
- Encrypted communication via HTTPS, SNMPv3, and TLS
- Removable mounting bracket for easy installation
- Power supply via PoE (IEEE 802.3af) or external DC voltage
Technical Data
- Measured variables:
- Temperature
- Relative humidity
- Two-state signals
- Temperature measurement:
- Measuring range depending on the connected DSxx probe
- Accuracy depending on the connected DSxx probe
- Resolution: 0.1 °C
- Humidity measurement:
- Measuring range depending on the connected DSxx probe
- Accuracy depending on the connected DSxx probe
- Resolution: 0.1 % RH
- Measuring channels:
- 1 × external temperature probe or
- 1 × combined temperature/humidity probe
- Maximum cable length per channel: 40 m
- Measurement interval: 2 s
- Available temperature units: °C, °F
- Power supply:
- Power over Ethernet (IEEE 802.3af)
- 5 – 24 VDC
- Dimensions: 116 × 85 × 42 mm (without connected probe)
- Weight: approx. 180 g
- Warranty: 3 years
Binary Inputs
- 3 × binary inputs
- Voltage input:
- Low level (L): < 1.0 V
- High level (H): > 2.5 V
- Internal source resistance: < 2 kΩ
- Input voltage range: 0 to +30 V
- Potential-free contact:
- Open-circuit voltage at the terminals: 3.3 V
- Current through closed contact: 0.1 mA
- Maximum contact resistance: < 5 kΩ
Communication & Network
- Ethernet interface
- IPv4 and IPv6 support
- HTTP / HTTPS
- Integrated web server (WWW)
- HTTP GET (JSON, XML)
- Modbus TCP
- SNMPv1
- SNMPv2c
- SNMPv3
- COMET Cloud compatible
- Email notifications (SMTP)
- Syslog
Environmental Conditions
- Operating temperature: -30 °C ~ +60 °C
Protection Class
- IP30
Scope of Delivery
- Comet PA8652
- Operating manual
- Traceable calibration certificate
- Free full version of the COMET Vision analysis software
- COMET Cloud for 3 months
- External sensors not included in delivery
- Power supply unit not included in delivery
Compatible Temperature Probes
Pt1000TG68/C temperature probe, RCA connector, cable options available
Compatible Temperature / Humidity Probes
Compatible Mounting Bracket
Additional Probes
Power Supply
Manufacturer Information:
COMET SYSTEM, s.r.o.
Bezručova 2901
756 61 Rožnov pod Radhoštěm
Czech Republic
Phone: +420 571 653 990
Email: info@cometsystem.com
Responsible person:
Didactum® Security GmbH
Im Mühlenfeld 4
48163 Münster
Deutschland
Fon:
(+49) 250 19 71 63 54 / (+49) 171 33 11 577
Email: info@didactum-security.de
