AKCP sensorProbe2+
€262.20
Up to Four Intelligent Sensors via a Single IP Address
The AKCP sensorProbe2+ (SP2+) is a compact monitoring device with four intelligent sensor ports that can be combined with the entire AKCP sensor portfolio. This makes it suitable for server rooms, smaller data centers, telecommunications facilities, industrial plants, as well as remote control cabinets and distribution rooms alike. According to the manufacturer, you can start with a simple basic package for a single cabinet and then expand the monitoring cabinet by cabinet into a complete data center solution, with all racks centrally managed via the AKCPro Server.
At the heart of the device is AKCP’s AutoSense technology: connected IP sensors are automatically detected and set up, significantly reducing installation effort and minimizing configuration errors. Two of the four sensor ports are active by default; the remaining two can be unlocked via a one-time Pro license upgrade, allowing the monitoring capacity to be expanded as needs grow without having to purchase new hardware.
The SP2+ is IP-based and supports, in addition to SNMP v1/v2c/v3, HTTPS, VPN, MQTT/MQTTS and BACnet, also RADIUS or TACACS authentication, Rsyslog, NTP and optionally IPv6. Via Modbus TCP and Modbus RS485, the device additionally acts as a gateway between Modbus devices and SNMP.
Four Sensor Ports for One or More Racks
The SP2+ reliably records the most important environmental and status values of one or more racks in real time.
4 Intelligent Sensor Ports
RJ45 AutoSense ports for the entire AKCP sensor portfolio, 2 of which are active by default.
Up to 20 Dry Contacts
Inputs and outputs (0/5VDC) for door contacts, alarms or external switches.
SNMP, MQTT & Rsyslog
IP-based monitoring with SNMP v1/v2/v3, HTTPS, VPN, MQTT/MQTTS and Rsyslog.
Virtual Sensors
5 virtual sensors already included, expandable to up to 80.
BACnet Integration
Connection to building automation systems via the BACnet protocol.
Two Power Supply Variants
Available either as a PoE version or with an external power supply.
Individually Configurable: Device Selection, License & Power Supply
The sensorProbe2+ can already be precisely adapted to your requirements during the ordering process via the device selection.
Please note: The order form provides a selection field “SP2+ Device Selection” via which one of the following five ready-made configurations is chosen: “SP2+ Pro with 4 active sensor ports”, “SP2+ Pro with 4 active sensor ports and PoE (no power supply)”, “sensorProbe2+ E (Modbus and expansion module compatibility)”, “sensorProbe2+ E PoE (Modbus and expansion module compatibility, no power supply)” and “sensorProbe2+ with PoE (2 ports active, no power supply)”. Not every theoretically possible combination is available as a separate offer – therefore check the dropdown list for the variant that suits you.
Basic vs. Pro – the Feature Set in Detail
SP2+ Basic
2 active sensor ports (expandable to 4 via Pro update), network functions HTTPS/TLS/SNMPv1/v2c, notification via e-mail and SNMP trap, virtual sensors only optionally available for a fee, limited expansion options.
SP2+ Pro
4 active sensor ports, additionally SNMPv3, VPN, RADIUS, Modbus TCP/IP and IPv6, 5 virtual sensors already included, encrypted e-mail and SNMP trap notifications, support for thermal mapping, RFID access control as well as Modbus/RS485.
SP2+ Pro Variant E
Like SP2+ Pro, additionally with an RS485 port for the direct connection of Modbus devices and AKCP expansion units.
Power Supply
PoE (no power supply included)
Power supply exclusively via Power-over-Ethernet (IEEE 802.3af) on the network cable; a separate power supply is not part of the scope of delivery for this variant.
With Power Supply
Variant without PoE designation, in which an external 5.5V/3A power supply (input 100–240 V AC, 0.22 A) is included in the scope of delivery for power supply.
How the sensorProbe2+ is Built
The housing of the SP2+ is compact at 114 x 63 x 32 mm (4.5" x 2.5" x 1.25"), weighs around 0.3 kg and is designed for 0U rack mounting. For long-term reliability, AKCP relies on highly integrated, power-saving SMD component technology.
Housing and Mounting
Compact housing for 0U rack mounting, compatible with AKCP’s DIN rail clips.
Status LEDs and Signaling Device
Separate LEDs indicate power supply, network connection as well as sensor status and threshold exceedances, supplemented by an internal buzzer for acoustic alarms.
Four Sensor Ports
Four RJ45 ports automatically detect connected AKCP AutoSense sensors; two of them are active by default depending on the variant, the others are unlocked via Pro license. Configurable output signals (0/5 VDC) are possible on all four sensor ports.
Expansion/Modbus Port (E Variant)
With the E variant, one of the sensor ports can be used as a Modbus RS485 interface or as an expansion port for up to 4 CCU, E-Opto16 or E-Sensor8 units.
Network and Power Connection
A 10/100 Mbps Ethernet port (RJ45, full duplex) establishes the network connection. Power supply is provided either exclusively via Power-over-Ethernet (IEEE 802.3af) on the same cable or via a separate external power supply, depending on the selected variant.
Optional Dual DC Power Supply
Via an optional DC-DC converter (DCW024-5), the SP2+ can also be supplied with two separate 12–24 VDC or 48–60 VDC inputs, which the converter converts to a single 5 VDC output voltage for the device – practical at telecom sites with direct DC feed or data centers with two separate PDUs.
Two Power Supply Variants
The SP2+ is ordered as one of two variants: either as a PoE variant or with an external power supply – both options are mutually exclusive at the time of purchase.
- PoE variant: Power supply exclusively via the network cable (IEEE 802.3af), no power supply included in the scope of delivery
- Power supply variant: Power supply via an external 5.5V/3A power supply (input 100–240 V AC)
- For the power supply variant, an optional DC-DC converter (DCW024-5) with two separate 12–24 VDC or 48–60 VDC inputs is available, which converts to a single 5 VDC output voltage for the SP2+
- This allows two separate power supplies on two separate circuits (e.g. with dual PDUs) to be combined into a redundant DC power supply – the redundancy here is between two power supplies, not between power supply and PoE
Compatible with the Entire AKCP Sensor Portfolio
The SP2+ can be combined with environmental, security, power and special sensors and thus adapted to a wide variety of application areas.
- Environmental sensors: temperature, humidity, water leakage
- Security sensors: RFID cabinet locks, door contacts, motion detectors
- Power sensors: AC and DC voltage sensors, sensor-controlled relays, current measurement
- Special sensors: tank level (up to 2 m depth), key switch for alarm deactivation, programmable LCD display
In total, the SP2+ supports up to 400 sensors – including virtual sensors and devices connected via expansion units.
More Than Pure Sensor Monitoring
Beyond physical sensor querying, the SP2+ offers functions for calculation, visualization and notification.
- Virtual sensors for calculated values such as heat index or dew point as well as complex alarm logic
- Notification via e-mail (optionally encrypted), SNMP trap and MQTT message
- Automatically generated graphs and reports for trend analysis
- Mapping function for the graphical representation of facilities and sensor positions
- Web-based user interface with real-time monitoring and configuration
- VPN connection to the AKCPro Server via Ethernet
Unlock Extensions via License
The SP2+ runs either with the Basic feature set or with a Pro license (SP2+PRO-L), which unlocks additional functions.
Pro License (SP2+PRO-L)
Unlocks, among other things, map views (Maps), 3rd-party Modbus, IPv6, SNMPv3, VPN, user management for access control, heartbeats, Modbus and remote UI access.
Virtual Sensors Package (VS)
5 additional virtual sensors per license, maximum of 80 possible; 5 virtual sensors are already included with the Pro version.
5 Dry Contact (DC5)
Unlocks 5 additional dry contact inputs per license; one license corresponds to one unlocked RJ45 port.
RADIUS / TACACS
Separate licenses for user authentication via a RADIUS (RAD) or TACACS+ server (TAC).
3rd Party Modbus
License for connecting additional Modbus devices (up to 4 devices with 15 sensors each, max. 60 Modbus sensors in total).
BACnet (BAC)
Separate license for integration into building automation systems via BACnet.
Access Management at Cabinet Level
In combination with RFID cabinet locks, the SP2+ also handles access control at rack level.
- Up to 100 users for access control included by default
- With license, expandable to up to 500 users
- Central management via the AKCPro Server
- Combinable with RFID locks for securing individual cabinets
Designed for Continuous Operation
Since the SP2+ itself is part of the critical infrastructure, AKCP places particular emphasis on longevity and a wide operating temperature range.
- MTBF of 1,400,000 hours based on field data with sensorProbe devices
- Operating temperature of 0 °C to 70 °C in the standard model
- Industrial variant with extended temperature range of -25 °C to 70 °C available
- Operating humidity of 20 % to 80 %, non-condensing
- Highly integrated, power-saving SMD technology for long-term reliability
Commissioning in Just a Few Minutes
Setting up the SP2+ is simple and quick – with no additional software required.
- Mount the device in the rack or on the DIN rail
- Connect the Ethernet cable (power supply depending on the ordered variant via PoE or external power supply)
- Open the device’s IP address in the browser (DHCP or fixed IP)
- Connect AKCP AutoSense sensors to the sensor ports – automatic detection
- Optional: Connect expansion units (CCU, E-Opto16, E-Sensor8) or Modbus devices (E variant)
- Optional: Configure alarm rules, virtual sensors, map views (Maps) and users in the web interface
- Optional: Establish connection to the AKCPro Server via VPN (Ethernet)
Why the sensorProbe2+ is the Right Choice
Four Sensor Ports
Monitoring of multiple parameters via a single device.
PoE or Power Supply
Available either as a PoE variant or with external power supply.
AutoSense Sensors
Automatic detection of the entire AKCP sensor portfolio.
Expandable
Up to 80 virtual sensors, Modbus, IPv6 and more via license.
Industrial Connectivity
E variant with Modbus RS485 and compatibility with CCU, E-Opto16, E-Sensor8.
BACnet-Capable
Direct integration into existing building automation systems.
Practical Application Examples
- Monitoring of individual or multiple server cabinets in server rooms and smaller data centers
- Temperature and humidity monitoring in remote control cabinets and distribution rooms
- Connection of generators or industrial Modbus devices via the E variant
- Access control at cabinet level with RFID locks, centrally managed via AKCPro Server
- Integration into building automation systems via BACnet
- Telecommunications sites with direct DC feed, optionally redundant via two power supplies
- Step-by-step expansion from single-cabinet monitoring to a complete data center solution
The AKCP sensorProbe2+ combines four flexible sensor ports, optional PoE or power supply, industrial expandability via Modbus and the proven sensorProbe+ software base in one device – a scalable solution for monitoring from a single cabinet through to larger, distributed sites.
Frequently Asked Questions
What is the AKCP sensorProbe2+ and what is it used for?
The sensorProbe2+ is a compact monitoring device with four intelligent sensor ports, compatible with the entire AKCP sensor portfolio. It is suitable for monitoring one or more server cabinets, smaller data centers, telecommunications facilities, industrial plants as well as remote control cabinets and distribution rooms.
What is the difference between Basic and Pro?
With the Basic version, 2 of the 4 sensor ports are active; with the Pro version, all 4. The Pro version additionally unlocks functions such as SNMPv3, VPN, RADIUS, Modbus TCP/IP, IPv6, 5 included virtual sensors, encrypted notifications as well as thermal mapping and RFID access control.
What distinguishes the E variant from the standard model?
With the E variant, one of the four sensor ports can additionally be used as a Modbus RS485 interface or as an expansion port. This allows Modbus-capable devices such as generators or industrial controllers as well as up to 4 AKCP expansion units (CCU, E-Opto16, E-Sensor8) to be connected.
How is the sensorProbe2+ powered?
The SP2+ is ordered as one of two variants: either as a PoE variant (power supply via the network cable, IEEE 802.3af, no power supply included in the scope of delivery) or as a variant with external 5.5V/3A power supply. Both variants are mutually exclusive at the time of purchase. With the power supply variant, an optional DC-DC converter (DCW024-5) can be used to redundantly combine two power supplies on separate circuits.
Can the sensorProbe2+ be integrated into building automation systems?
Yes, the SP2+ supports the BACnet protocol and can therefore be integrated directly into existing building automation systems.
How many sensors does the SP2+ support in total?
The SP2+ supports up to 400 sensors in total, including virtual sensors and sensors connected via expansion units. Virtual sensors can be licensed in packages of 5 up to a maximum of 80; with the Pro version, 5 are already included.
Can the SP2+ also be used for access control?
Yes. In combination with RFID cabinet locks, the SP2+ can be used for access control at cabinet level, centrally managed via the AKCPro Server. Up to 100 users are included by default; with a license, management can be expanded to up to 500 users.
How robust is the sensorProbe2+ for continuous operation?
According to the manufacturer, the SP2+ achieves an MTBF of 1,400,000 hours and operates in the standard model at temperatures from 0 °C to 70 °C. For particularly demanding environments, an industrial variant with an extended temperature range of -25 °C to 70 °C is also available.
Via which channels does the SP2+ notify in the event of an alarm?
The SP2+ supports notifications via e-mail (optionally encrypted via SSL/TLS or STARTTLS), SNMP traps as well as MQTT messages, so that administrators can be reached via various preferred channels.
Questions about the sensorProbe2+?
Our support team in Germany will advise you free of charge on selection, options and setup.
YouTube
- Dimensions: 114 × 63 × 32 mm (4.5" × 2.5" × 1.25")
- Weight: 0.3 kg
- Network interface:
- Standard 10/100 Mbps Full Duplex
- Ethernet RJ-45 port
- Mounting:
- 0U rack mounting
- Compatible with AKCP DIN rail clips
- Power supply:
- External power supply: 5.5 V / 3 A
- Input voltage/current: 100–240 V~ – 0.22 A
- Optional: PoE support (IEEE 802.3af)
- Status indicators:
- Power supply LED
- Network connection LED
- Sensor status and threshold LED
- Integrated buzzer for alarms
- Sensor connections:
- 4× RJ-45 ports (SP2+)
- 2× ports standard active, 2 additional unlockable by license (SP2-V2)
- Inputs:
- Up to 20 dry contact inputs and outputs (0VDC/5VDC)
- Optional RJ-45 port for expansion or Modbus RS485
- Outputs:
- Configurable output signals (0VDC/5VDC)
- Possible on all 4 RJ-45 sensor ports
- Additional connections:
- 1× 10/100 Ethernet port
- Optional: integrated 3G/4G modem with external antenna
- Optional: GPS function
- Maximum number of sensors:
- Up to 400 sensors total
- Including virtual sensors and expansion units
- Expansion options:
- 1 sensor port can be used as Modbus RS485 or expansion port (SP2+E)
- Supports up to 4 CCU, E-Sensor8, or E-Opto16 units*
- Maximum number of users for access control:
- 500 users (with license)
- 100 users included by default
- Operating environment:
- Temperature: 0 °C to 70 °C (industrial option: –25 °C to 70 °C)
- Humidity: 20 % to 80 % (non-condensing)
- MTBF: 1,400,000 hours (based on field data with sensorProbe devices)
- Technology: Highly integrated, energy-efficient SMD technology for long-term reliability
- Supported protocols:
- Rsyslog*
- MQTT / MQTTS*
- SNMP V1/2/3
- IPv6*
- RADIUS**
- TACACS**
- HTTPS
- Encrypted email
- VPN support:
- Connection to AKCPro server via VPN
- Usage via Ethernet or mobile network
- Virtual sensors:
- 5 virtual sensors included in delivery
- Up to 80 virtual sensors possible*
- Modbus support:
- Up to 4 Modbus devices with 15 sensors each*
- Max. 60 Modbus RS485 or TCP/IP sensors in total**
- Authentication:
- RADIUS user authentication server
- TACACS via RADIUS (license required)
* Requires Pro license
** Requires additional license
Suitable power supply unit
Virtual sensors package (extension)
AKCP sensorProbe1+: Package with 5 Virtual Sensors – Smart Integration of External Devices Extend the monitoring capabilities of your AKCP sensorProbe1+ base unit far beyond the physical sensor connections! With the "Package with 5 virtual sensors" (and the ability to activate up to 80 virtual sensors), you transform your sensorProbe1+ into an intelligent bridge that integrates data from a wide range of external devices into your central monitoring system. This package is the ideal solution for more comprehensive monitoring of your infrastructure without the need to deploy additional hardware. What are virtual sensors and how do they expand your sensorProbe1+? Virtual sensors are not physical sensors, but logical data points that enable your sensorProbe1+ to collect information from devices connected via network protocols. With this package of 5 licenses, you can take your first steps into advanced monitoring and, if needed, expand to up to 80 virtual sensors. This is particularly suitable for integrating external devices via: SNMP (Simple Network Management Protocol): Monitor the status, bandwidth usage, or error messages of network components such as servers, routers, switches, or UPSs. Modbus: Integrate data from industrial control systems, air conditioning units, smart meters, or other Modbus-enabled devices typically found in data centers and industrial plants. Ping: Check the availability of critical network devices and receive immediate notification if a device goes offline. The sensorProbe1+, known for its reliability and ease of use, becomes an even more powerful tool thanks to these virtual sensors. You can not only monitor environmental conditions but also keep an eye on the status of your entire IT and industrial infrastructure from a central point. Data collected by the virtual sensors is treated just like data from physical sensors: it can trigger alarms, be visualized in charts, and used for reports. Your benefits at a glance: Comprehensive monitoring: Extend your sensorProbe1+ beyond physical sensors to network and industrial devices. Cost efficiency: Avoid purchasing multiple specialized monitoring solutions. Centralized data collection: All relevant information is consolidated on your sensorProbe1+. Easy integration: Use established protocols such as SNMP, Modbus, and Ping. Scalability: Start with 5 virtual sensors and expand to up to 80 as needed. Make your sensorProbe1+ the heart of your intelligent infrastructure monitoring. The package with 5 virtual sensors is your entry point into expanded and more efficient monitoring!
Extension 5DCS
AKCP sensorProbe1+: License for 5 Dry Contacts (5DCS) – Extended Status Monitoring for Your Infrastructure Expand the functionality of your AKCP sensorProbe1+ base unit and integrate a wide range of binary status signals into your central monitoring. The "License for 5 Dry Contacts (5DCS)" unlocks five additional inputs for dry contact sensors on your sensorProbe1+, allowing you to reliably monitor critical states such as door openings, smoke alarms, or the status of UPS systems. This package is ideal for supplementing your monitoring strategy with simple but crucial on/off signals. What are dry contacts and how do you benefit from them? Dry contacts are simple electrical contacts that report a binary state—open or closed. They do not emit voltage themselves but react to an external change (e.g., a door closing, a relay being triggered) and signal this state to the sensorProbe1+. Typical applications for dry contacts include: Security monitoring: Door contacts, window contacts, motion detectors, alarm status of intrusion detection systems. Environmental monitoring: Leak sensors (water, liquids), smoke detectors, fire suppression systems. Device status: UPS status (battery operation, mains failure), status of circuit breakers, fan failures, emergency stop switches. With the "License for 5 Dry Contacts (5DCS)", you can connect five such external devices or sensors to your sensorProbe1+. The base unit immediately detects changes in the state of these contacts and can trigger correspondingly configured alarms—whether via email, SMS, or SNMP trap. This transforms your sensorProbe1+ into an even more versatile guardian for physical security and operational status. Why choose this license for your sensorProbe1+? The sensorProbe1+ is a cost-effective and compact solution for basic monitoring. By adding the dry contacts license, you significantly expand its range of applications. You can easily integrate existing switches or alarm systems and obtain a central platform that collects both environmental data and important status messages. This is particularly advantageous for small server rooms, remote technical locations, or sensitive areas where both environmental and security aspects need to be monitored. Your benefits at a glance: Versatile status monitoring: Capture a wide range of on/off states. Increased security: Monitor doors, windows, and access points. Enhanced environmental control: Integrate smoke and leak detectors. Easy integration: Use standardized dry contact interfaces. Reliable alerting: Immediate notification of state changes. Make your sensorProbe1+ an even more powerful and comprehensive monitoring tool—with the license for 5 dry contacts!
Matching AKCP sensors
Professional AKCP Dual Sensor monitors temperature and humidity over network with AutoSense function and SNMP integration for data centres.
Alternative devices
Manufacturer information:
AKCess Pro Ltd.
267/4 Soi Sichon, Sutthisan Rd., Samsen Nok
Huai Khwang Bangkok, 10310
Thailand
Email: sales@akcp.com
Responsible person:
Didactum® Security GmbH
Im Mühlenfeld 4
48163 Münster
Deutschland
Fon:
(+49) 250 19 71 63 54 / (+49) 171 33 11 577
Email: info@didactum-security.de
