WLD sensing cable A - Water detection chain
€127.50
Reliable Water Leak Detection with the WLD Water Detection Chain A
In environments such as server rooms, data centers, archives, or industrial facilities, even small water leaks can cause significant damage. Short circuits, equipment failures, or data loss are often the result of undetected liquids.
The HW-group WLD Water Detection Chain A offers a highly reliable solution for early water leak detection, minimizing such risks. This sensor cable is specifically designed to detect conductive liquids like water or ethylene glycol along its entire length, making it ideal for use in sensitive areas such as IT infrastructures, air conditioning systems, or piping. Thanks to its flexibility and robustness, it can be easily attached to floors, walls, or pipes without the functionality being affected by bending radius, twisting, or pressure.
The sensor cable is a central component of the HW-group water leak detection system and works in combination with devices like HWg-WLD, HWg-WLD Relay, SD-WLD, WLD2, or Perseus Monitoring 140–155. It enables area-wide water detection, as opposed to spot sensors, thus providing more comprehensive protection. The cable detects even the smallest amounts of liquid and immediately triggers an alarm, which can be forwarded via email, SNMP traps, or other monitoring systems. A special feature is its reusability: after a leak, the cable can be cleaned, dried, and used again, saving costs in the long term.
The installation of the WLD Water Detection Chain A is straightforward and does not require special training. It can be attached to almost any surface with adhesive tape or clips, making it ideal for complex environments such as data centers or industrial plants. With lengths of 2 m, 10 m, or 50 m, which can be combined up to 85 m of sensor cable and extended up to a total of 185 m with an extension cable (WLD Prolong Cable A), the system offers maximum flexibility for individual requirements. The robust construction of the cable ensures reliable operation even under demanding conditions, without movements of other cables or mechanical stress causing false alarms.
Water monitoring with this sensor cable is especially in demand in areas where quick response times are crucial to avoid costly damage. It supports a wide range of monitoring devices and can be integrated into existing systems such as Poseidon2, Damocles2, or STE2. The status messages (OK, Flooded, Cable Interrupted) provide clear information about the condition of the monitored area, while compatibility with modern communication protocols such as SNMP enables seamless integration into network monitoring systems.
The WLD Water Detection Chain A is designed for use in extreme environments. It operates reliably at temperatures from 0 °C to 100 °C and humidity from 0% to 100% RH, making it suitable for use in server rooms, cold rooms, or damp basements. The cable also demonstrates its robustness during storage, withstanding temperatures from -30 °C to 60 °C and humidity from 5% to 95% RH. With a weight of 1171 g (50 m version) and compact dimensions (50,000 x 18 x 10 mm), it is easy to handle and install.
The sensor water technology of the cable is based on a resistance principle, which precisely detects even the smallest amounts of liquid. It is particularly suitable for applications where server room monitoring is required to protect expensive IT equipment from water damage. By allowing the cable to be wrapped along pipes or laid under raised floors, particularly vulnerable areas can be monitored. The high reliability and avoidance of false alarms make the WLD Water Detection Chain A a preferred choice for professional monitoring solutions.
In summary, the Water Detection Chain A is a state-of-the-art solution for liquid detection, characterized by flexibility, reusability, and easy installation. It protects valuable infrastructures from the consequences of water leaks and offers companies security and cost efficiency. Whether in data centers, museums, hotels, or industrial plants – this sensor cable provides early warnings and minimizes the risk of operational downtime.
Detection:
- Liquid detection: Water, ethylene glycol, other conductive liquids along the entire cable length
- Zones: 1 WLD zone (max. 85 m sensor cable + 100 m extension cable)
- Status messages: 0 = OK, 1 = Flooded, 2 = Cable interrupted
Sensor Cable:
- Type: WLD Sensor Cable Type A
- Length: Available in 2 m, 10 m, 50 m (combinable up to 85 m sensor cable, extendable up to 185 m with WLD Prolong Cable A)
- Properties: Reusable (cleanable and dryable), no limitation by bending radius, twisting, or pressure, robust for floor, wall, or pipe mounting
Technical Specifications:
- Technology: Resistance
- Operating environment: 0 °C to 100 °C, 0% RH to 100% RH
- Storage environment: -30 °C to 60 °C, 5% RH to 95% RH
- Dimensions (50 m version): 50,000 x 18 x 10 mm (W x H x D)
- Weight (50 m version): 1171 g
- Connection: Terminal block
- Compatibility: HWg-WLD, HWg-WLD Relay, SD-WLD, Perseus Monitoring 140–155, WLD2
- Installation: Table, wall, floor, or pipe (with adhesive tape or clips)
Available Versions:
Set 1:
WLD measuring cable 2m (Water Leak Detection - Type A) – Can be used to extend the WLD measuring cable within a zone. No connection cable included.
Set 2:
WLD sensor cable 10m (Water Leak Detection - Type A) – Can be used to extend the WLD sensor cable within a zone. No connection cable included.
Set 3:
WLD probe cable 50m (Water Leak Detection - Type A) – Can be used to extend the WLD probe cable within a zone. No connection cable included.
Set 4:
2-cable package: (WLD probe cable A - 2m) + (WLD A connection cable 2m) = total length 4m. Can be connected to any WLD zone input terminal (green terminal).
Set 5:
2-cable package: (WLD probe cable A - 10m) + (WLD A connection cable 2m) = total length 12m. Can be connected to any WLD zone input terminal (green terminal).
Set 6:
2-cable package: (WLD probe cable A - 50m) + (WLD A connection cable 2m) = total length 52m. Can be connected to any WLD zone input terminal block (green terminal block).
YouTube
- WLD Sensor Cable 2m (Water Leak Detection - Type A)
NO WLD-A connection cable included - WLD Sensor Cable 10m (Water Leak Detection - Type A)
NO WLD-A connection cable included - WLD Sensor Cable 50m (Water Leak Detection - Type A)
NO WLD-A connection cable included. - 2-Cable Package: (WLD Sensor Cable A - 2m) + (WLD A Connection Cable 2m)
Total length 4m - 2-Cable Package: (WLD Sensor Cable A - 10m) + (WLD-A Connection Cable 2m)
Total length 12m - 2-cable package: (WLD sensor cable A - 50m) + (WLD-A connection cable 2m)
Total length 52m
Detection:
- Liquid detection: Water, ethylene glycol, other conductive liquids along the entire cable length
- Zones: 1 WLD zone (max. 85 m sensor cable + 100 m extension cable)
- Status messages: 0 = OK, 1 = Flooded, 2 = Cable interrupted
Sensor Cable:
- Type: WLD sensor cable type A
- Length: Available in 2 m, 10 m, 50 m (combinable up to 85 m sensor cable, extendable up to 185 m with WLD Prolong Cable A)
- Properties: Reusable (cleanable and dryable), no limitation by bending radius, twisting or pressure, robust for floor, wall, or pipe mounting
Technical Specifications:
- Technology: Resistance
- Operating environment: 0 °C to 100 °C, 0% RH to 100% RH
- Storage environment: -30 °C to 60 °C, 5% RH to 95% RH
- Dimensions (50 m version): 50,000 x 18 x 10 mm (W x H x D)
- Weight (50 m version): 1171 g
- Connection: Terminal block
- Compatibility: HWg-WLD, HWg-WLD Relay, SD-WLD, Perseus Monitoring 140–155, WLD2
- Installation: Table, wall, floor, or pipe (with adhesive tape or clips)
Monitoring devices
Other available sensors
Extension units
Accessories
Mounting Plate D Bracket for Ares and Poseidon2 Operating environment: -3°C - 85°C / 0%RH - 100%RH Storage environment: -30°C - 60°C / 5%RH - 95%RH Dimensions: 74 x 6 x 120 (W x H x D) / 58g Warranty: 24 months Wall mounting plate for Ares, Poseidon2 3266/68 and other products.
DB9 LapLink Cable 2m A LapLink cable (also known as Lablink or null-printer cable) is a cable used to connect two computers directly via a cable connection. Housing: Plastic Type: Cable
DIN-Rail Box Set A mounting kit for installing HW-group devices on a DIN rail. Applications and Use: Mounting kit for installing HW-group devices with metal housing on a DIN rail. Operating environment: -30°C - 85°C / 0%RH - 100%RH Storage environment: -30°C - 60°C / 5%RH - 95%RH Dimensions: 45 x 11 x 105 (W x H x D) / 22g
Mounting Kit Screw set for mechanical mounting Applications and Use: Screw set for mechanical fastening
Mounting Plate E- 1U Rack (cabinet) mounting plate, 1U mounting for HW-group Ares and Poseidon2 devices Operating environment: -30°C - 85°C / 0%RH - 100%RH Storage environment: -30°C - 60°C / 5%RH - 95%RH Dimensions: 127 x 45 x 94 (W x H x D) / 137g Warranty: 24 months Rack (cabinet) mounting plate, 1U mounting for HW-group Ares, Poseidon2 3266/3268 and other products.
Mounting Plate L DIN Rail DIN rail mounting plate for Ares, Poseidon2 3268, and other products. Features: Metal housing Wall mounting Applications and Use: Profiles for metal-encapsulated HWg devices for wall mounting. Dimensions: 150 x 120 x 45 (W x H x D) / 65g Warranty: 24 months
Mounting Kit for Poseidon2 4002 and HWg-SMS-GW3 Applications and Use: Mounting kit for Poseidon2 4002 and HWg-SMS-GW3 Operating environment: -30°C - 85°C / 0%RH - 100%RH Storage environment: -30°C - 60°C / 5%RH - 95%RH Dimensions: 136 x 45 x 16 (W x H x D) / 165g Warranty: 24 months
Rack Shelf 1U A versatile solution for easy mounting of HW-group devices in 1U racks. Operating environment: -30°C - 85°C / 0%RH - 100%RH Storage environment: -30°C - 60°C / 5%RH - 95%RH Dimensions: 485 x 44 x 104 (W x H x D) / 597g Warranty: 24 months Housing: Metal Type: Wall mounting This shelf makes it easy to use devices in racks. You can even combine different 1U products and sensors.
Software
Manufacturer information:
HW group s. r. o.
Rumunská 26
Prague, 120 00
Czech Republic
Phone: +420 222 511 918
Email: sales@hwg.cz
Responsible person:
Didactum® Security GmbH
Marsweg 17
48163 Münster
Deutschland
Fon: +49 - 2501 - 9 78 58 80
Email: info@didactum-security.de
