Temp-1W-UNI Pt100 Cable - Temperature sensor incl. Pt100 probe
€217.30
The high-precision Pt-100 temperature sensor with 1-Wire-UNI connection
The HW group Temp-1W-UNI Pt100 Cable is a Pt-100-based temperature sensor with a 1-Wire-UNI output. It consists of a Pt-100 measuring probe (Pt100/A) with a 2 m silicone cable and a 1-Wire-UNI converter (Converter 2xPt100 1W-UNI) that integrates the probe into the 1-Wire network. An additional second Pt-100 or Pt-1000 probe can be connected to the converter.
The Pt-100 probe offers high accuracy over a wide temperature range, a long service life, and is protected to IP67 against dust and water jets. The sensor is compatible with all HW group products.
Precise temperature measurement over a wide range
Thanks to Pt100/Pt1000 technology, the sensor measures reliably even at extreme temperatures.
Measuring range -50 °C to +200 °C
Accuracy ±0.3 °C over the entire measuring range of the probe, resolution 0.1 °C.
8 calibration points
Factory calibration at 8 points for high measurement accuracy over the entire range.
Second probe connectable
The converter accepts an additional second Pt-100 or Pt-1000 probe.
IP67 probe
The Pt-100 measuring probe itself is dust- and waterproof to IP67.
How the Temp-1W-UNI Pt100 Cable is designed
The product consists of two parts: the actual Pt-100 measuring probe and the 1-Wire-UNI converter that connects the probe to the 1-Wire network.
Pt-100 measuring probe
A high-precision Pt100/A probe is permanently connected to the converter via a 2 m long, flexible silicone cable and measures directly at the desired measuring point.
1-Wire-UNI converter (Converter 2xPt100 1W-UNI)
The converter converts the analog Pt-100 signal into a digital 1-Wire-UNI signal. Its housing measures 79 x 68 x 30 mm (W x H x D), weighs approximately 197 g, and has an IP23 protection rating.
Second probe input
A second input for another Pt-100 or Pt-1000 probe can be used on the converter, allowing two measuring points to be recorded with just one device.
RJ11 connection with 3 m cable
The converter is connected to the HWg device via an RJ11 plug and a 3 m connection cable and is supplied with 5 V / 20 mA via this connection.
Wall mounting
The converter can be mounted on the wall while the actual Pt-100 probe is flexibly placed at the measuring point.
For the entire HWg 1-Wire ecosystem
According to the manufacturer, the sensor is compatible with all HW group products that have a 1-Wire/1-Wire-UNI connection, such as Poseidon, Ares, STE2, and Perseus devices.
Areas of application
- Cooling and freezing systems
- Pharmaceutical industry
- Food industry
- Industry and production (machines, systems, storage rooms)
- Outdoor temperature monitoring, e.g. environmental technology or agriculture
- Research and development in laboratories
Frequently asked questions
What is the HW group Temp-1W-UNI Pt100 Cable and what is it used for?
It is a Pt-100-based temperature sensor with a 1-Wire-UNI output, consisting of a measuring probe and a converter. It is suitable for precise temperature measurements over a wide range, for example in cooling/freezing systems, the pharmaceutical and food industries, or outdoor applications.
Can a second probe be connected?
Yes. The supplied converter (Converter 2xPt100 1W-UNI) has a second input to which another Pt-100 or Pt-1000 probe can be connected.
Which two cables are included in the scope of delivery?
The Pt-100 probe is permanently connected to the converter via a 2 m silicone cable. In addition, a 3 m RJ11 cable connects the converter to the HWg device.
How accurately does the sensor measure?
The accuracy is ±0.3 °C over the entire measuring range from -50 °C to +200 °C, with a resolution of 0.1 °C. The converter is factory-calibrated at 8 points.
Is the probe suitable for outdoor use?
The Pt-100 measuring probe is protected to IP67 and is therefore suitable for humid and dusty environments. The converter itself has an IP23 rating and should be mounted with appropriate protection.
Which HWg devices is the sensor compatible with?
According to the manufacturer, the sensor is compatible with all HW group products with a 1-Wire/1-Wire-UNI connection, such as Poseidon, Ares, STE2, and Perseus devices.
Questions about the Temp-1W-UNI Pt100 Cable?
Our support team in Germany will advise you free of charge on selection, installation, and connection.
Sensor Specifications
• Sensor type: Temperature sensor
• Measured values: Temperature – °C
• Dimensions: 79 x 68 x 30 (WxHxD)
Communication
• PT100/PT1000
• Power supply: 5V
• Connectors: RJ11
Temperature Measurement Range
• Range: ± 0.3 °C in range from - 50°C to +200 °C
• Number of values provided: 2
• Storage environment: -30°C – 60°C / 5%RH – 95%RH
• Resolution: 0,1
• Calibrated Points: 8
Installation
• Mounting: Wall
Monitoring devices
Other available sensors
Extension units
Software
Manufacturer information:
HW group s. r. o.
Rumunská 26
Prague, 120 00
Czech Republic
Phone: +420 222 511 918
Email: sales@hwg.cz
Responsible person:
Didactum® Security GmbH
Im Mühlenfeld 4
48163 Münster
Deutschland
Fon:
(+49) 250 19 71 63 54 / (+49) 171 33 11 577
Email: info@didactum-security.de
