HTemp-1Wire Outdoor 3m - Temperature & humidity sensor
€207.90
Precise Outdoor Temperature and Humidity Monitoring – HTemp-1Wire Outdoor 3m Sensor
The HTemp-1Wire Outdoor 3m Dual Temperature and Humidity Sensor is a versatile and robust sensor specifically designed for demanding outdoor conditions. With its combination of precise measurement and resilient design, it ensures reliable control of environmental parameters that are crucial in technical facilities, warehouses, greenhouses, and other external environments.
Extended Measurement Range for Temperature and Humidity
The sensor measures temperatures from –30 °C to +85 °C, reliably covering both extreme cold and high heat. This makes it ideal for use in climatically challenging outdoor areas where temperature fluctuations are often significant. Relative humidity is measured in the range of 0% to 100% RH, ensuring comprehensive detection of moisture conditions—a key factor in preventing corrosion, mold formation, or other moisture-related damage.
Robust Construction for Outdoor Use
The sensor’s housing consists of a sturdy metal casing, specifically designed to meet the requirements of outdoor installations.
Although the sensor does not have IP67 certification, the construction provides sufficient protection against weather influences and temperature fluctuations, making it well suited for outdoor use.
The 3-meter cable with RJ11 connector allows flexible installation at hard-to-reach or optimal measurement locations.
Modern Interface and Flexible Networking Options
The HTemp-1Wire Outdoor 3m communicates via the proven 1-Wire interface (MicroLan), allowing easy integration into HW group monitoring systems such as Poseidon2, Ares, or STE2. Especially practical is the support for daisy-chain functionality, enabling multiple sensors to be easily connected. This chaining via T-Box units allows for efficient and organized networking of sensors in large facilities or expansive outdoor areas.
Diverse Application Areas and Practical Uses
The sensor is ideal for monitoring temperature and humidity in a wide variety of outdoor environments. Whether in greenhouses, open-air warehouses, technical facilities, or other exposed locations—the recorded data enables early detection of critical environmental conditions that could otherwise lead to damage to machinery, materials, or plants. The precise measurement values help increase operational safety and enable targeted implementation of necessary protective measures.
Compatibility and Easy Integration into HW group Systems
The HTemp-1Wire Outdoor 3m sensor is fully compatible with various HW group devices, including Poseidon2, Ares, HWg-STE, and STE2. Each sensor has a unique identification number (sensor ID), allowing automatic detection and seamless integration into existing monitoring networks. This ensures straightforward setup and management of multiple sensors within a system.
Key Product Features at a Glance:
- Combined dual sensor for temperature and relative humidity
- Temperature measurement range from –30 °C to +85 °C – ideal for outdoor use
- Humidity measurement from 0% to 100% RH for comprehensive environmental monitoring
- 3-meter cable with RJ11 connector for flexible positioning
- Robust metal housing, specially developed for outdoor areas
- 1-Wire interface (MicroLan) for easy integration into HW group devices
- Supports daisy-chaining to connect multiple sensors together
- Compatible with HW group devices such as Poseidon2, Ares, HWg-STE, and STE2
- Unique sensor ID for automatic detection and management
- Suitable for numerous outdoor applications in technical facilities, greenhouses, and warehouses
Why is the HTemp-1Wire Outdoor 3m Sensor Your Best Choice for Outdoor Monitoring?
Monitoring temperature and humidity outdoors is often a challenge, as sensors must withstand extreme environmental conditions. The HTemp-1Wire Outdoor 3m offers an ideal solution: With its robust construction and extended measurement range, it delivers reliable and precise data even under adverse conditions. The 1-Wire interface allows seamless integration into HW group monitoring systems, so you always have an accurate overview of environmental conditions.
Additionally, the daisy-chain function makes it easy to install multiple sensors, allowing you to monitor even large or complex outdoor facilities without difficulty. The ability to centrally record multiple measurement points makes the sensor particularly efficient and cost-effective.
With this sensor, you not only protect your technical infrastructure from temperature damage and moisture problems but can also respond in a timely manner when critical values are exceeded. This helps prevent costly failures and sustainably increases the safety of your facilities.
Practical Application Areas:
- Monitoring temperature and humidity in greenhouses
- Climate control in outdoor warehouses and open spaces
- Environmental monitoring in technical outdoor facilities and utility stations
- Protection of sensitive materials against weather-related damage
- Integration into smart building and environmental management systems
- Monitoring in agricultural operations and open-air farms
The Perfect Outdoor Sensor for Temperature and Humidity
The HTemp-1Wire Outdoor 3m sensor from HW group is a robust and precise solution for monitoring temperature and humidity outdoors. Its high-quality construction, wide measurement range, and easy integration into HW group systems make it the ideal choice for technical facilities, greenhouses, and other demanding environments. The daisy-chain function enables flexible networking of multiple sensors and makes it easier to monitor large areas.
With the HTemp-1Wire Outdoor 3m dual temperature/humidity sensor, you significantly increase the operational safety of your outdoor facilities, detect critical environmental changes early, and can respond accordingly to avoid damage and failures.
Measuring range:
- Temperature: -30 °C to +85 °C (-22 °F to +185 °F)
- Relative humidity: 0% to 100% RH (non-condensing)
Temperature:
- Resolution: 0.1 °C
- Measurement accuracy: ±0.4 °C in the range of -10 °C to +80 °C
- Technology: Digital semiconductor
Humidity:
- Resolution: 0.1% RH
- Measurement accuracy: ±3% RH in the range of 20% to 80% RH
- Long-term stability: Typically < 1% RH/year
General specifications:
- Interface: 1-Wire (RJ11 connector)
- Cable length: 3 m
- Operating voltage: 3.3 V to 5.5 V (via 1-Wire bus)
- Current consumption: Typically 1 mA
- Housing: Metal, suitable for outdoor use
- Compatibility: HW group devices (Poseidon2, Ares, HWg-STE, STE2)
- Chaining: Supports daisy-chaining via T-Box
Monitoring devices
Other available sensors
Extension units
Accessories
Mounting Plate D Bracket for Ares and Poseidon2 Operating environment: -3°C - 85°C / 0%RH - 100%RH Storage environment: -30°C - 60°C / 5%RH - 95%RH Dimensions: 74 x 6 x 120 (W x H x D) / 58g Warranty: 24 months Wall mounting plate for Ares, Poseidon2 3266/68 and other products.
DB9 LapLink Cable 2m A LapLink cable (also known as Lablink or null-printer cable) is a cable used to connect two computers directly via a cable connection. Housing: Plastic Type: Cable
DIN-Rail Box Set A mounting kit for installing HW-group devices on a DIN rail. Applications and Use: Mounting kit for installing HW-group devices with metal housing on a DIN rail. Operating environment: -30°C - 85°C / 0%RH - 100%RH Storage environment: -30°C - 60°C / 5%RH - 95%RH Dimensions: 45 x 11 x 105 (W x H x D) / 22g
Mounting Kit Screw set for mechanical mounting Applications and Use: Screw set for mechanical fastening
Mounting Plate E- 1U Rack (cabinet) mounting plate, 1U mounting for HW-group Ares and Poseidon2 devices Operating environment: -30°C - 85°C / 0%RH - 100%RH Storage environment: -30°C - 60°C / 5%RH - 95%RH Dimensions: 127 x 45 x 94 (W x H x D) / 137g Warranty: 24 months Rack (cabinet) mounting plate, 1U mounting for HW-group Ares, Poseidon2 3266/3268 and other products.
Mounting Plate L DIN Rail DIN rail mounting plate for Ares, Poseidon2 3268, and other products. Features: Metal housing Wall mounting Applications and Use: Profiles for metal-encapsulated HWg devices for wall mounting. Dimensions: 150 x 120 x 45 (W x H x D) / 65g Warranty: 24 months
Mounting Kit for Poseidon2 4002 and HWg-SMS-GW3 Applications and Use: Mounting kit for Poseidon2 4002 and HWg-SMS-GW3 Operating environment: -30°C - 85°C / 0%RH - 100%RH Storage environment: -30°C - 60°C / 5%RH - 95%RH Dimensions: 136 x 45 x 16 (W x H x D) / 165g Warranty: 24 months
Rack Shelf 1U A versatile solution for easy mounting of HW-group devices in 1U racks. Operating environment: -30°C - 85°C / 0%RH - 100%RH Storage environment: -30°C - 60°C / 5%RH - 95%RH Dimensions: 485 x 44 x 104 (W x H x D) / 597g Warranty: 24 months Housing: Metal Type: Wall mounting This shelf makes it easy to use devices in racks. You can even combine different 1U products and sensors.
Software
Manufacturer information:
HW group s. r. o.
Rumunská 26
Prague, 120 00
Czech Republic
Phone: +420 222 511 918
Email: sales@hwg.cz
Responsible person:
Didactum® Security GmbH
Marsweg 17
48163 Münster
Deutschland
Fon: +49 - 2501 - 9 78 58 80
Email: info@didactum-security.de
